SUBEA
Ref.
8485007
2532534
SCD Adaptor for scuba diving regulator DIN/Yoke INT
€27.00
Tax included
Store Availability
Store Availability
Our team of divers developed this accessory to change from a DIN to Yoke (INT), allowing you to use an INT (yoke) scuba tank
BENEFITS
Flexibility
Convert a DIN regulator so it can be used with INT valves.TECHNICAL INFORMATIONS
Technical specifications
Yoke adaptor (INT) to DIN (G5/8) female.
Length: 9 cm
Meets the standard EN 250
Adapts to all types of 232 bar or 300 bar regulators.
Caution: this adapter can be used at a maximum pressure of 232 bar only.
Length: 9 cm
Meets the standard EN 250
Adapts to all types of 232 bar or 300 bar regulators.
Caution: this adapter can be used at a maximum pressure of 232 bar only.
Routine maintenance
Never use solvents or hydrocarbon-based products to clean or lubricate the regulator yourself.Never use spray cans, because the gas propellent can attack the plastic.
Use a silicone grease to lubricate the seals and increase their lifespan.
Use a silicone grease to lubricate the seals and increase their lifespan.
Servicing the regulators
SUBEA-TRIBORD advises you to service your regulator every two years and to make a visual inspection at least once a year.This two inspections must be made in a SUBEA-TRIBORD certified workshop.
A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
composition
composition
Bottle body: 100.0% Brass; Plug: 20.0% Polyamide, 80.0% Brass
Tips for storage and maintenance
Storage tips
It is important to store diving equipment away from sources that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.
Restrictions on use
Diving requires the certification of an instructor.
TESTS AND WARRANTY
Warranty
2 Years
Agree by
Our technical partner: Planet Ocean, a PADI 5 star diving centre based at TRIBORD.The centre uses SUBEA equipment throughout the year.The team of instructors are rigorously involved in the development of our diving products.From the design stage, with product managers, designers and engineers, through prototype testing to long-term wear tests, with the help of novice divers and training instructors.