Filters 0
Filters 0
SUBEA Ref. 8491262 2521804

SCD 900 Scuba Diving Buoyancy Compensator

€300.00
Tax included
de_modelcolor: BLACK / YELLOW
  • BLACK / YELLOW
Not available online

Store Availability

Our design teams have developed this new Subea high-buoyancy jacket with a high carrying capacity for advanced divers.

BENEFITS

Lightweight

3.3 kg in size M

Versatility

2 deployable weight pockets (3 kg each) + 2 fixed back pockets (2 kg each)

Abrasion resistance

Fabric material: 400d dobby polyamide. Bladder fabric: Polyamide PA210

Flexibility

5 securing rings, 2 side pockets. Stainless steel automatic strap buckle.

Adjustable

Automatic dive tank strap with a stainless-steel buckle

Carrying comfort

3D compressible back to increase carrying comfort

Buoyancy

High buoyancy with deployable bladder: 180 N

Instructions


TECHNICAL INFORMATIONS

Type of BCD

The SUBEA SCD 900 buoyancy compensator is of the “wraparound” type: the volume of the air is distributed over the entire surface of the body that is covered, providing a significant level of buoyancy and improved support in the vertical position. This makes for greater comfort in the surface phases.

The SCD 900 BC is designed for comfort and its adjustment has been optimised by the harness with a wide front strap, a chest strap and patented braces.

Unisex buoyancy compensator with patented V-shaped straps: Rgomoove concept

The exclusive shape of the straps leaves the arms free whilst providing even better support. The shape of the straps also prevents compression of the chest, making this buoyancy compensator suitable for both men and women. The buckles on the straps allow for easy and accurate adjustment thanks to their shape and size. For easy adjustment, you are advised to pull the straps from the shoulders towards the hips (the direction of the braces) rather than downwards.

Accessories to attach and store everything you need in safety!

5 rings: 1 3D anodised ring on the left shoulder, 2 on the right shoulder, 2 3D anodised rings on the hips and 1 PVC ring inside each pocket.

2 ejectable weight pockets that can each hold up to 3 kg + 2 fixed weight pockets (“trim” weight) on the back

The chest strap has a built-in whistle to call for help on the surface.

Ease of use

The drain tabs have been moved forwards: on the chest for the upper drain, and on the belly under the right-hand pocket for the lower drain. Their shape and the choice of metallic grey also make for an easier grip (by the diver or a mate).

The two large side pockets are able to hold numerous accessories. They are fitted with injected plastic zips to avoid salt build-up that would block them.

Carrying comfort

For more comfort, the SCD 900 jacket is fitted with a rigid back complemented by a soft compressed 3D foam lining at the points of contact with the back.

The braces are also padded for more suppleness on the shoulders.

The front strap is designed with elastic parts so that the compensator fits perfectly on the back and hips.

Buoyancy

S =160 N (15 l steel tank)

M =180 N (15 l steel tank)

L =210 N (15 l steel tank)

XL =220 N (15 l steel tank)



This Subea SCD 900 jacket complies with standard EN 1809: 2014 (the latest version of the standard). It has been certified by the ITALCERT SRL laboratory in MILAN

Italy (European Notified Body n° 0426).

Product composition

SUBEA buoyancy compensators are made of high-quality materials that have been tested in seawater and in pools.

Fabric material: 400d dobby polyamide.

Inflatable chamber fabric: PA210 polyamide with PU laminate.

The size label is always visible on the compensator’s collar.

Supplied with a direct system hose.

Care advice

1/ Rinse your buoyancy compensator thoroughly with clean water. Pay particular attention to the drains and the inflater. 2/ Empty any water that may be contained in the buoyancy compensator by pulling the lower drain tab. Do not store water in the inflatable bladder.

3/ Dry your buoyancy compensator on a wide hanger, out of the sun.



Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.

Servicing buoyancy compensators

Your buoyancy compensator must be inspected and serviced by a certified SUBEA centre at least every two years, and more often if you are a frequent diver.



After Sales Service: Please visit our website.

composition

composition

Main fabric: 100.0% Polyamide

Tips for storage and maintenance

DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C. DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT. MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C. IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT. MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C. IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.

Storage tips

Store on a hanger in a dry, ventilated place away from direct sunlight (make sure the buoyancy compensator is slightly inflated).

Restrictions on use

Using a diving buoyancy compensator requires the certification of an instructor.

TESTS AND WARRANTY

Test product

Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the WaterSports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).

Warranty

2 Years

Parts guarantee

Availability of spare parts essential to the use of the product: 10 years.