SUBEA
Ref.
8562173
2884289
SCD 500 Scuba Diving Buoyancy Compensator
€250.00
Tax included
Store Availability
Store Availability
Our Subea design teams have developed a wraparound BC with drop-in ballast pockets for intermediate divers.
BENEFITS
Anatomic design
Patented V-shaped straps for men and women.
Lightweight
3.09 kg in size M
Abrasion resistance
Fabric material: 400d dobby polyamide. Bladder fabric: Polyamide PA210
Flexibility
5 D-rings, 2 large side pockets and releasable weight pockets.
Buoyancy
Buoyancy: M = 160 N (15 L steel tank)TECHNICAL INFORMATIONS
Type of BCD
The SUBEA SCD 500 buoyancy compensator is of the “wraparound” type: the volume of the air is distributed over the entire surface of the body that is covered, providing a significant level of buoyancy and improved support in the vertical position. This makes for greater comfort in the surface phases.
The SCD 500 BC is designed for comfort and its adjustment has been optimised by the harness with a wide front strap, a chest strap and patented braces.
The SCD 500 BC is designed for comfort and its adjustment has been optimised by the harness with a wide front strap, a chest strap and patented braces.
Unisex buoyancy compensator with patented V-shaped straps: Rgomoove concept
The exclusive shape of the straps leaves the arms free whilst providing even better support. The shape of the straps also prevents compression of the chest, making this buoyancy compensator suitable for both men and women. The buckles on the straps allow for easy and accurate adjustment thanks to their shape and size. For easy adjustment, you are advised to pull the straps from the shoulders towards the hips (the direction of the braces) rather than downwards.
Ease of use
The drain tabs have been moved forwards: on the chest for the upper drain, and on the belly under the right-hand pocket for the lower drain. Their shape and the choice of metallic grey also make for an easier grip (by the diver or a mate).
The openings of the two side pockets have been lowered for easier access.
Two loops are also provided to secure a pressure gauge or to hold the octopus so that it is always within easy reach.
The openings of the two side pockets have been lowered for easier access.
Two loops are also provided to secure a pressure gauge or to hold the octopus so that it is always within easy reach.
Carrying comfort
For added comfort, SUBEA design teams have developed reinforced back padding on the back of the buoyancy compensators, to cushion the tank. The braces are also padded for more suppleness on the shoulders. The front strap contains elastic parts so that the compensator fits perfectly on the back and hips.
Accessories to attach and store everything you need in safety!
5 rings: 1 3D anodised ring on each shoulder, 2 3D anodised rings on the hips and 1 PVC ring inside the pocket.
2 releasable weight pockets each holding up to 3 kg.
The chest strap has a built-in whistle to call for help on the surface.
Two loops are also provided to secure a pressure gauge or to hold the octopus so that they are always within easy reach.
2 releasable weight pockets each holding up to 3 kg.
The chest strap has a built-in whistle to call for help on the surface.
Two loops are also provided to secure a pressure gauge or to hold the octopus so that they are always within easy reach.
Buoyancy
The new version of the SUBEA SCD 500 buoyancy compensator is more buoyant.
Buoyancy calculated with a 15 L steel tank
XS= 120 N
S =130 N
M =160 N
L =170 N
XL =200 N
This Subea SCD 500 BC complies with standard EN 1809: 2014 +A1 2016 (latest version of the standard). It has been certified by the ITALCERT SRL laboratory in MILAN
Italy (European Notified Body n° 0426).
Buoyancy calculated with a 15 L steel tank
XS= 120 N
S =130 N
M =160 N
L =170 N
XL =200 N
This Subea SCD 500 BC complies with standard EN 1809: 2014 +A1 2016 (latest version of the standard). It has been certified by the ITALCERT SRL laboratory in MILAN
Italy (European Notified Body n° 0426).
Product composition
SUBEA buoyancy compensators are made of high-quality materials that have been tested in seawater and in pools.
Fabric material: 400d dobby polyamide.
Inflatable chamber fabric: PA210 polyamide with PU laminate.
The size label is always visible on the compensator’s collar.
Space is provided for clubs on the left shoulder and the pockets to indicate the size, if necessary.
Supplied with a direct system hose.
Fabric material: 400d dobby polyamide.
Inflatable chamber fabric: PA210 polyamide with PU laminate.
The size label is always visible on the compensator’s collar.
Space is provided for clubs on the left shoulder and the pockets to indicate the size, if necessary.
Supplied with a direct system hose.
Care advice
1/ Rinse your buoyancy compensator thoroughly with clean water. Pay particular attention to the drains and the inflater. 2/ Empty any water that may be contained in the buoyancy compensator by pulling the lower drain tab. Do not store water in the inflatable bladder.
3/ Dry your buoyancy compensator on a wide hanger, out of the sun.
Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.
3/ Dry your buoyancy compensator on a wide hanger, out of the sun.
Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.
Servicing buoyancy compensators
Your buoyancy compensator must be inspected and serviced by a certified SUBEA centre at least every two years, and more often if you are a frequent diver.
After Sales Service: Please visit our website.
After Sales Service: Please visit our website.
composition
composition
Main fabric: 100.0% Polyamide
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Store on a hanger in a dry, ventilated place away from direct sunlight (make sure the buoyancy compensator is slightly inflated).
Restrictions on use
Diving requires the certification of a certified instructor.
TESTS AND WARRANTY
Test product
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the WaterSports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Warranty
2 Years
Agree by
All the SUBEA buoyancy compensators were also developed through usability and convenience testing (static, dynamic and biomechanical analysis) conducted by DAN Europe, as a specialist and independent consultant. *DAN Europe (Divers Alert Network Europe) is an international non-profit medical and research organisation dedicated to the safety and health of divers.
Parts guarantee
Availability of spare parts essential to the use of the product: 10 years.