The EN1150 visibility standard
The effectiveness of this jacket's visibility has been certified by an external Finnish laboratory according to the very demanding EN1150 standard. It guarantees excellent visibility during the day (thanks to the neon yellow) and at night (thanks to the very powerful reflective patches). The standard also requires 360° visibility. You'll be visible to all road users in all conditions.
The resistance of a fabric to water pressure is expressed in mm of a water jet (test based on standard ISO 811). The higher the pressure, the more waterproof the fabric. These are the waterproof characteristics of the RC500 jacket: 8,000 mm before washing, 5,000 mm after 5 washes.
It's not just the fabric that's important for the product's waterproofing; the construction is just as big a deal. The seams on the RC500 are sealed and we have chosen to use the waterproof YKK AquaGuard® zip.
BREATHABILITY OF THE FABRIC (RET)
To see whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more it lets water vapour produced by the body escape, therefore the more breathable it is.
• RET <6: extremely breathable, suitable for the most intense workouts
• RET 6 to 12: very breathable, designed for moderate exercise
• RET 12 to 20: moderately breathable, not enough for exercise
• RET >20: little breathability, unsuitable for exercise
MEMBRANE OR COATING?
The RC500 jacket's fabric has a membrane.
The membrane is a type of very thin micro-perforated plastic film (polyurethane) which makes the fabric both waterproof and breathable. It is also very supple, lighter, more durable and more breathable than a fabric with a coating.
Coating is a layer applied to the interior of the fabric which makes the fabric waterproof. It costs less than a membrane, and requires a lining to protect it.
As you know, if the road is wet, it can be very unpleasant getting your shorts covered in spray from the rear wheel. To solve this problem, we've equipped the RC500 jacket with a retractable flap at the base of the back. It can be discreetly folded into the back of the jacket, and is very practical when needed.
It goes without saying that adding a mudguard to the rear of your bike adds even more protection against splashes.
CLASSIC FIT: Fitted and comfortable. This timeless cut is perfect for your longer bike rides, whether in the saddle or having a break.
This fit is tighter than our "Relaxed Fit", but not as tight as our "Pro Fit".
TESTS AND WARRANTY
Our team of designers and cycling enthusiasts is based in Lille, in northern France, not far from Flanders and its legendary cycling routes. To get this rainproof jacket just right, we tested it all over Flanders throughout the winter: we believe that only by subjecting our products to real world conditions, like the ones you experience on your bike, we can continuously improve them.
Our RC500 jacket has been approved by Rémi and Olivier, two cyclists who set out on a 15,000-km bike tour of Europe visiting 26 countries in 6 months.