Double ventilated lens and anti-fogging treatment on the inner lens
Exchangeable lens accessories, S1 and S3
Injected polycarbonate, resists impacts, with maximal quality of vision. Outer surface treatment with a flash that increases protection against light intensity. This flash is easily scratchable. Use the Wed'ze microfibre case to clean the lens and do not rub the inner side of the lens but carefully stamp the surface in order to preserve the efficiency of the antifog action as long as possible.
In polyurethane. Painted frame.
Polyamide elastic, Polyester and rubber 40 mm high, and 2 silicone strips for a good grip on the goggles.
Consider protecting the goggles and particularly the lens from possible scratches, before and after use, with the Wed'ze microfibre case. This case also cleans the lenses, its material is perfect for maintaining them in good condition without scratching them
S1 or S3 lens, available at €12.95 for better accuracy; see better in the fog, or darker lens in bright sun. Instructions: pull the frame at the forehead level to release the lens, then the sides and at last the nose. Reposition the lens first through the nose, then the sides and at last the forehead. Make sure you protect your lens once taken off by storing it in the microfibre case intended for the frame.