Characteristics Designed for Don't fall overboard.
Breaking resistance2000 DaN
The installation of grab lines is indispensable to allow movement around the deck while remaining attached to your harness. Unfortunately, this element of the "harness-tether-grab line" set is often neglected or "cobbled together".
a few principles: • A grab line must only be attached to the points provided for this purpose. • The attachment points must cross the deck and be mounted with a backplate. They must be able to resist at least 3 tonnes. • A grab line must have no knots in it, and the seams must be tested and calibrated. Ideally, grab lines should be situated as far inside the boat as possible to prevent them falling overboard.
Product catchlinePolyester, strap width 30 mm. Resistance 2000 DaN. Sold in pairs (Without shackle; recommended minimum breaking load for the shackle: 2000 DaN)