Size 5 Football 2020 - Hungary

€ 8.00
SKU: S311710 / 2940549 / 8555689
Select a color:

    Size : 5
Size Guide
List of stores
Delivery in 2-5 working days
Reserve & deliver

Order online
Delivery in 7 to 10 working days
Product benefits
  1. Durability
    Resists up to 2500 SHOTS against an inclined flat surface at 50 km/h.
  2. Lasting air retention
    Latex bladder.
  3. Bounce
    31 panels with 2 laminate layers combined with a latex / butyl bladder.
Product feature
  1. Design
    We have conducted numerous lab tests to guarantee the ball's ability to withstand every hit.
  2. Circumference
    Between 68.5 and 69.5 g (Size 5).
  3. Sphericity
    Average measured variation: maximum 2%. We measure the football's sphericity at 16 different points and examine the recorded discrepancies. If the discrepancy is greater than 2% (FIFA PRO Standard), our engineers are tasked with improving the sphericity to ensure a consistent bounce.
  4. Maximum pressure loss
    We inflate the ball to the recommended pressure (meaning 0.8 bar). 72 hours later, the ball must not lose more than 15% of its pressure, meaning approx. 0.1 bar. The pressure after 72 hours must, therefore, be at approx. 0.7 bar. This also means that it is quite normal for a ball to lose pressure after a few days.
  5. Maximum water absorption
    We simulate rainy playing conditions in a lab, leaving the ball to sit in 2 cm of water on a pivoting support whilst subjecting it to 250 compressions. By the end of the test, this Hungary ball must not have absorbed more than 20% of its weight, or approx. 80 g in size 5.
  6. Weight
    Between 420 and 445 g (Size 5).
  7. Bounce
    Between 125 and 155cm with a maximum difference of 10cm between the ball's highest and lowest bounce. Each ball is dropped 10 times on a steel plate from 2 metres in height.
  8. Shape and pressure retention
    The most demanding test that this ball is subjected to is the machine shot test. Withstands up to 2500 shots against an inclined concrete surface at 50 km/h at a distance of 2.5 m. At the end of the test, we check: - the ball's general state: stitching must withstand this test - the circumference: must not have increased by more than 1.5 cm. - the sphericity: it must not have varied by over 1.5% - the pressure: loss of pressure must not exceed 0.1 bar.
Product testing
  1. Composition
    Outcover : 100.0% Polyvinyl Chloride - Phtalate Free Bladder : 70.0% Rubber - Natural Rubber - Latex, Bladder : 30.0% Rubber - Synthetic Backing : 100.0% Polyester
  2. Product restrictions
    Not suitable for playing on tarmac.
  3. Product information
    Our design teams prioritised the exterior cover's durability and bounce for your most thrilling matches.
  4. Lab tested
    Complies with international federations standards.