TRIBORD
Ref.
8676290
4451495
Kids' Overtrousers Sailing 100 Navy blue
€16.50
Tax included
Store Availability
Store Availability
Our designers—and fellow sailors—developed this polo shirt for sailing in stormy weather.
BENEFITS
Anatomic design
Flat waistband for extra comfort, elasticated to keep it in placeCompact design
These overtrousers easily pack down into a pocketWaterproof
Tested in moderate rain for 2 hours 5,000 mm Schmerber Pocket not waterproofPockets
1 secure pocketBreathability
Very breathable coating (RET<12)TECHNICAL INFORMATIONS
WATERPROOF PROPERTIES
We measure the resistance of a fabric to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure withstood by the fabric, the more waterproof it is.
Here are the waterproofing ratings:
Component resistant to 5,000 mm water pressure before and after ageing (5 washes). This equates to 5 000 Schmerber - average pressure exerted by the water during rain.
The trousers' waterproofing has been tested in a rain shower with 60 litres of water/m²/hour for 2 hrs
Here are the waterproofing ratings:
Component resistant to 5,000 mm water pressure before and after ageing (5 washes). This equates to 5 000 Schmerber - average pressure exerted by the water during rain.
The trousers' waterproofing has been tested in a rain shower with 60 litres of water/m²/hour for 2 hrs
OVERTROUSERS CARE INSTRUCTIONS
- Rinse with clean water after use
- Store in a dry place
- To protect the water-repellent treatment, wash as little as possible
- Wash the product inside out and fastened. 30°C or 40°C synthetic cycle with regular detergent. Do not use fabric conditioner. Do not overload your machine. Extra rinse cycle.
- Line dry.
- To reactivate the water repellency, tumble dry inside out on a synthetic cycle for 10 to 15 minutes.
- Store in a dry place
- To protect the water-repellent treatment, wash as little as possible
- Wash the product inside out and fastened. 30°C or 40°C synthetic cycle with regular detergent. Do not use fabric conditioner. Do not overload your machine. Extra rinse cycle.
- Line dry.
- To reactivate the water repellency, tumble dry inside out on a synthetic cycle for 10 to 15 minutes.
WATERPROOF RATING IN MM OR SCHMERBER
We measure the fabric resistance to water pressure in mm of water column (based on the JIS standard). The higher the water pressure withstood by the fabric, the more waterproof it is. A component with that is waterproof to 5000 mm therefore resists the pressure of 5000 mm of water.
BREATHABILITY OF THE OVERTROUSERS
COMPONENT BREATHABILITY
To find out if a fabric is breathable, its coefficient of Thermal Evaporative Resistance (RET) is measured during a test based on the ISO 11092 standard. The lower the resistance, the more the fabric allows the water vapour generated by the body during exercise to escape and the more breathable it is.
- RET < 9 = extremely breathable fabric
- 9 < RET < 12 = very breathable fabric
- 12 < RET < 20 = breathable fabric
- RET > 20 = not very or not breathable fabric
To find out if a fabric is breathable, its coefficient of Thermal Evaporative Resistance (RET) is measured during a test based on the ISO 11092 standard. The lower the resistance, the more the fabric allows the water vapour generated by the body during exercise to escape and the more breathable it is.
- RET < 9 = extremely breathable fabric
- 9 < RET < 12 = very breathable fabric
- 12 < RET < 20 = breathable fabric
- RET > 20 = not very or not breathable fabric
composition
composition
Main fabric: 100.0% Polyamide; Coating: 100.0% Polyurethane; Yoke: 100.0% Polyester
Tips for storage and maintenance
ANY TYPE OF IRONING ALLOWED.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
DO NOT TUMBLE DRY.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years