TRIBORD
Ref.
8361992
2061817
Adult Sailing Inflatable Life Jacket with Harness LJ150N AIR - Black
€80.00
Tax included
Store Availability
Store Availability
Enjoy offshore sailing in complete safety! Don't worry about falling, you are attached!
BENEFITS
Easy opening / closing
Zipped outer cover makes it easier to fold.Ease of use
Built-in harness complies with EN ISO 12401. Crotch strap.Freedom of movement
Exclusive, patented ergonomic cut to free your movements.Visibility
Inner bladder: Bright Orange.Buoyancy
Standard EN ISO 12402-3, 150 N. UML system activates upon contact with water.TECHNICAL INFORMATIONS
Automatic inflation system
When dropped in water, the salt bobbin dissolves instantly, releasing the firing pin that then pierces the cylinder of compressed CO₂. This allows the bladder to inflate in only a few seconds. When inflating, the bladder opens the life jacket's zip.
To re-arm the life jacket:
- deflate it using the back of the pipette cap.
- fold in the bladder and zip up the textile cover.
Change the cartridge and the salt bobbin following the instructions from the re-arming kit
To re-arm the life jacket:
- deflate it using the back of the pipette cap.
- fold in the bladder and zip up the textile cover.
Change the cartridge and the salt bobbin following the instructions from the re-arming kit
Tips for rearming the life jacket.
Follow the order of installation instructions carefully:
1. Replacing the salt bobbin
2. Replacing the CO₂ cylinder
If you do not follow this order of installation, there is a risk of piercing the new cylinder if the salt bobbin inflation system has already been used.
1. Replacing the salt bobbin
2. Replacing the CO₂ cylinder
If you do not follow this order of installation, there is a risk of piercing the new cylinder if the salt bobbin inflation system has already been used.
Expiry dates
WARNING:
The dates present on the CO₂ cartridge and the salt bobbin have different meanings:
salt bobbin = expiry date. The bobbin must be replaced when this date is exceeded
CO₂ cartridge = date of manufacture. The cartridge must be replaced 5 years after this date.
The dates present on the CO₂ cartridge and the salt bobbin have different meanings:
salt bobbin = expiry date. The bobbin must be replaced when this date is exceeded
CO₂ cartridge = date of manufacture. The cartridge must be replaced 5 years after this date.
Putting the flashing light on the life jacket
Do you want to know how to attach a flashing light? It's easy!
- Unzip the life jacket
- Clip the light to the strap (left or right)
- Let the sensor (at the end of the wire) hang down towards the bottom of the life jacket, this is the part that will turn on the light as soon as it comes into contact with water.
- Unzip the life jacket
- Clip the light to the strap (left or right)
- Let the sensor (at the end of the wire) hang down towards the bottom of the life jacket, this is the part that will turn on the light as soon as it comes into contact with water.
User weight
Designed for sailors who weigh between 40 and 130 kg with a waist circumference of 60 to 130 cm.
composition
composition
Main fabric: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE 95°C. NORMAL TREATMENT.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
To avoid unexpected inflation during storage, unscrew the gas cylinder and the inflation system; store in a dry place away from sunlight.
TESTS AND WARRANTY
Warranty
2 Years
Agree by
Our technical partner, Tanguy De Lamotte, professional skipper, provided his expertise for this life jacket. He approved the zip closure of the outer cover, which prevents it from getting caught on lifelines, as well as the presence of the crotch strap. Finally, he recommends that all users attach themselves to the boat as often as possible, hence the choice of the integrated harness.