Kids' Horse Riding Body Protector Airbag - Black
Store Availability
This airbag body protector was designed for protecting your upper body from impacts (cervical spine, thorax, abdomen, and back).
Our horse riding designers created this airbag body protector to ensure maximum safety without compromising freedom of movement.
BENEFITS
Easy dressing
Front zip closure
Freedom of movement
Open at the arms to permit complete freedom of movement
Impact protection
The Air Bag has been tested and certified according to standard NF S72-800 :2022
TECHNICAL INFORMATIONS
Competition regulations:
In the EEC, the Airbag body protector can only be worn in competitions when paired with a body protector that meets current standards, currently BETA level 3, CE EN 13158:2009.
First placement after purchase:
The airbag you have just purchased IS NOT ACTIVATED and requires a significant movement on your part to make it operational.
You need to "arm" the airbag on the same principle as changing the cartridge and attaching the leash.
You'll find everything you need to help you at the bottom of this page, under "Site Support (FAQ, user guide...)"
Explanations are laid out in the user guide and explanatory video below.
Using compatible cartridges and accessories for body protectors:
The airbag protector is sold with a gas cartridge that should be replaced after each inflation.
The cartridge for kids' airbags must be 63 cc (ref: 5323924)
The use of any other brand of cartridge voids all manufacturer's warranties and responsibilities. The same applies to the accessories needed for the body protector to work properly (saddle strap and leash with carabiner (known as the "connection strap")). All parts are available from after-sales on our website.
Choosing your size:
Refer to the table in the product images.
Consider the following 2 measurements: chest circumference and back length (also see the user guide). If you find your measurements corresponding to two different sizes, we recommend choosing the larger size indicated for your product.
Standards and trigger speed:
CE CERTIFICATION - The Air Bag body protector has been tested by the CRITT lab and certified by Alienor Certification (organisation that certifies protective equipment).
Airbags are classified as Personal Protective Equipment (PPE)
Complies with standard: NF S72-800 :2022 (only standard designed for horse riding airbag protectors)
The average trigger speed is 138 milliseconds for all kids' sizes
Use and operation of the airbag:
The airbag attaches to the saddle at the stirrup knives using the "saddle strap", which connects to the airbag using a leash with a snap hook ("connection strap").
In the case of a fall or a sudden significant tension on the leash, the leash will detach from the body protector, causing it to inflate. All you need to "re-arm" it is to replace the cartridge with a new one and re-attach the system.
All explanations are available in the user guide.
Adjustment
The Airbag should always be worn over the rest of your riding equipment. Wearing clothing on top may prevent the airbag from opening and slow the inflation time, and you risk being overcompressed by the inflated body protector during a fall. An airbag protector should not be worn cinched.
How to replace your cartridge:
You can find all the detailed explanations in the manual, via the QR code on the manual, and you can find a video of the product images on the Internet.
We recommend that an adult change the cartridge on junior Airbag body protector to ensure that the product is properly (re)armed.
Care advice:
Wash using a slightly damp sponge.
Transport:
Please note: a body protector airbag must not be folded or exposed to extreme heat (back shelf of a car not recommended).
composition
composition
Main fabric: 100.0% Polyester; Shifter: 33.0% Steel, 12.0% Brass, 48.0% Polyamide, 7.0% Glass Fiber; Inside shell - Main lining: 100.0% Polyester; Bladder: 100.0% Thermoplastic Polyurethane Polyether Based; Carabiner: 100.0% Stainless Steel; Webbing: 100.0% Polypropylene; Main fabric - Coating: 100.0% Polyurethane
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
An airbag body protector should be stored in a dry, ventilated place. It should not be folded or exposed to great heat (such as the back shelf of a car).
Restrictions on use
Rider <20 kg
TESTS AND WARRANTY
Test product
NF S72-800 :2022
Warranty
2 Years