Women's hybrid snowboard boots, medium flex - Endzone white
Store Availability
We developed these women's snowboard boots for freestyle riding throughout the field.
Experience resort-wide snowboarding. Featuring distinct upper and lower lacing systems, they boast optimised inner lacing for enhanced ankle support and a wheel tightening mechanism.
BENEFITS
Thermal insulation
EVA foam sole, 80% air to insulate from cold ground
Rigidity
Medium flex 5/10 provides comfort and manoeuvrability for freestyle
Adjustable
3-zone fastening: Ankle lace dial and dual zone lace tightening
Traction
Ultralight sole with large studs for good grip on all types of snow
Cushioning
PU foam under the heel for more cushioning. Lightweight EVA foam sole
Fitting comfort
Maximum comfort with thermoformable liner.
Foot support
Ergonomic 10 mm foam heel wedge: better support of the foot for freestyle
Repair
Free lifetime replacement of habu® laces & adjustment wheels:habufit.com/support
TECHNICAL INFORMATIONS
Separate tightening system - 3 zones
The 3 zone tightening on these boots is designed for demanding snowboarders:
1. Atop wheel tightening (wheel + laces + lace guide) to adjust ankle support as desired
2. Tightening of the bottom of the shoe with laces blocked by a specially designed plastic piece
3. Tightening laces at the top of the boot for personalised tightening.
habu® Fit System (produced by Boa® technology)
The habu® fItsystem combines three important technical elements to transform the snowboard experience:
1) the innovative innovative wheel ensures micro-adjustment and precision,
2) the habu® cable is light, but very durable with 75 stainless steel strands.
3) Low friction habu® lacing guides ensure uniform pressure distribution whilst reducing wear and guaranteeing a long lifespan
How to repair the habu®FitSystem
Supplied by BOA Technology, the wheels and the laces of the adjustment system have undergone thousands of hours of rigorous tests in the lab and in the field, and are guaranteed to prolong the life of the boot on which they are built into.
After-sales service is guaranteed on the website habufit.com/support
Boot flex/stiffness
Medium flex (5/10) to provide optimal comfort for freestyle, whether it be to tweak your grabs or on boxes or rails. A stiffer boot would be more demanding and less comfortable in the snow park.
Adding Flex Up
The Flex Up (8600870) enables you to make your boot more rigid on 2 out of 10 flexion points (with Flex Up, this new boot has a rigidity of around 5/10).
This is an accessory which is inserted into the tongue of Decathlon snowboard boots produced from the 2022/23 season onwards. A pocket has been included in the design so that it's properly positioned in terms of height and laterality.
Heel support: level 3 liner (/3)
Foot support is essential when snowboarding to steer your board (such as foot in the boot or liner in the boot). The level 3 liner has 6 benefits:
1. Thermoformable liner from home
2. Ergonomic ankle foam
3. Liner fastening thanks to the fabric built into the shoe
4. Tightening wheel to hold the foot in place at the bottom of the boot
5. Velcro on top of the liner
6. 3D insole
1. Thermoforming the liner by yourself / WARNING
THERMOFORMING IS ONLY POSSIBLE IN BUILT-IN OVENS MEASURING 56 x 60 x 56 cm WITH A FAN MODE. DO NOT TRY ON A GAS OVEN OR A SMALL TABLE TOP OVEN WITH VISIBLE HEATING ELEMENTS.
1. Thermoforming the liner independently / INSTRUCTIONS FOR USE
1. Heat your oven to 80°C in convection mode
2. Remove the inner soles from the liners, place the liners on the oven plate covered with a piece of baking paper
3. Wait 15 mins
4. Put the socks back on, put them on with a pair of ski-snowboard socks and tighten them (not too much)
5. Put the boots on and tighten fully to 5. Wait for 15 minutes when static.
This operation can be repeated if necessary.
2. Ergonomic Heel Pad ankle foam
The ankle bone padding fills the hollow under and behind the ankle to hold the heel firmly in place. The level 3/3 liner contains a foam made in an exclusive Dreamscape material and shape :
- the shape is based on an average of 40 foot scans. It’s perfect for holding the foot in place and adapts to everyone
- the material: a soft but firm elastomer foam.
You can feel the support as soon as you slip your feet inside. And when you ride, there are no hard points
3. The liner tightens with a 3 point textile inner lacing
The liner in the Endzone boots is surrounded by textile inner lacing with 3 point tightening. This concept spreads the tightening force evenly around the foot, for good foot stability in the boots.
4.Heel cushioning
We have fitted a layer of PU foam under the insole (liner insole) to increase comfort under the heel when landing jumps.
5. Velcro strip on top of liner
The top of the liner has velcro strips, enabling you to hold the tongue of the liner in place with the sides, no matter how your foot is moving. This way, your foot is kept supported throughout the day.
6. 3D insole
The insole of this boot is 3 dimensional. This sole is pre-shaped at the heel and arch of the foot to help prevent the foot from moving inside the liner. It offers comfort and thermal insulation. If you feel you need to maintain your foot more securely in the liner, there is another alternative: get a sole that can be thermoformed to suit your foot. This is the most effective solution.
Sole: grip, traction, cushioning and thermal insulation
Our Ultralight sole is 100% EVA foam. EVA is a very light material with 80% air. This formulation is designed to resist abrasion while keeping its damping properties. It is naturally very insulating and protects against the cold rising from the ground. We designed in large studs to offer you very good grip. Sufficiently far apart from each other, they help get rid of the snow.
How can I be sure it's the right size?
1. Put the boot on
2. Tighten the boot
3. Stand upright
4. Your big toes should just touch the tip of the boot without causing unpleasant pressure
5. Bend your legs forward, your big toes move backwards and no longer touch the end of the boot.
A word from the product manager
We have designed these boots to provide you with the best support and comfort for freestyle :
- Textile tightening design on the liner for optimised ankle support
- Tightening wheel to adjust support according to your preference and style
- Classic tightening laces with central part to separate the top and bottom
- PU cushioning under the heel for comfort on landing
- EVA foam sole, 80% air, lightweight, insulating, protects from the cold
composition
composition
Upper of: 80.0% Polyurethane, 20.0% Polyester; Outer sole of: 100.0% Ethylene Vinyl Acetate; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
Storage tips
At the end of the day, remove the liners from the uppers to improve ventilation and dry quickly. Also, remove the inner sole from the liner to dry fully in one night.
TESTS AND WARRANTY
Test product
All Decathlon's Snowboarding products are tested in real conditions of use for which they were designed. Under the snow, in the cold, in all weather conditions when snowboarding on powder, in the snowpark, or on the runs. Our design teams, product managers, engineers and pattern makers ensure the product's design corresponds perfectly to its real-world use.
Warranty
2 Years
Agree by
Any passionate riders interested in becoming a tester? Contact us on our website!
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 2% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.
-
ProcessDope dyed
Product made from 5% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 12% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
MaterialRecycled rubber
Product made from 2% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 26%.