Kids' warm and waterproof hiking shoes - SH500 MTN lace-up - size 2.5 - 5.5
Want to climb the snowy slopes? This warm boot with perfect grip for the mountains has been designed for young hikers looking for adventure.
Thanks to its membrane, this warm and waterproof shoe will offer you good comfort during your hikes in cold weather. Its 4.5mm studs will allow you to hike with confidence on snow
BENEFITS
Traction
Traction on snow thanks to the location and depth of the 4.5 mm studs
Grip
SNOWCONTACT technology: optimum grip/traction on snow
Warmth
Comfort temperature: -5°C Limit temperature: -15°C
Waterproof
Breathable, waterproof membrane to keep your feet dry
Foot support
High upper and lace-up fastening provide a wide opening and adjustment
TECHNICAL INFORMATIONS
Breathable boots for optimal thermal comfort
Thermal comfort is a balance between the warmth of the boots and its ability to let the foot breathe. Too much heat or not enough breathability means that damp accumulates and cold can set in. We have designed your boots with your activity in mind, be it occasional or regular, with a membrane which prevents water ingress and lets damp out.
How do your boots protect you from outdoor conditions?
Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.
How do I choose the right footwear for snow hiking?
To be well equipped in winter, we recommend that you follow these guidelines :
Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool)
Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimise moisture.
Boot height: adapt the height of the sock to the height of the upper and preferably choose high models if you want more protection.
Will your boots withstand regular use over the long-term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
What is the difference between traction and grip?
The traction of the boots depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot.
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.
How does the SNOWCONTACT technology used on the boot sole help me?
SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the boot. Products (spray or liquid) for this purpose are available in our stores.
How can I be sure that my boots are 100% waterproof?
We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half submerged in water. We also conducted field tests to measure wear and ageing.
How to dry the inside of your shoe.
Shoes can become heavy while they’re being worn in the wet (condensation and perspiration)
If your boots are very wet, we advise you to remove the insole, fill the upper with balls of newspaper and change them regularly. The paper will pump out moisture and speed up drying.
Never put the shoes too close to a heat source, but leave them in a warm, dry and ventilated place.
Can you be sure that your boots are warm enough for your winter hikes?
We perform comparative studies carried out in a thermal laboratory, in walking conditions in light winds (5km/h). This is how we measure the thermal resistance of our boots. However every individual feels the cold differently.
Comfort temperature: felt slightly cold & 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold & 10% of users consider the thermal sensation acceptable on their feet.
composition
composition
Upper of: 40.0% Polyurethane, 60.0% Polyester; Outer sole of: 80.0% Polyurethane, 20.0% Thermoplastic Polyurethane; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store your products in a well-ventilated room away from light and moisture.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Body shape (in particular from 3D analysis) Movement science Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences In particular, we test the holding of seams, gluing, toxicology, resistance to UV and abrasion.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our field test engineer, our product manager, as well as a panel of testers test the products throughout their development until they are marketed.
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 15% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 3% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled thermoplastic
Product made from 9% recycled thermoplastic
Using recycled thermoplastic rather than conventional thermoplastic reduces the CO2 emissions linked to the material by at least 11%.