Kids’ Snowboots, UK Jnr size 7-5, SH500 SYNTH WARM - Blue
These waterproof boots follow your child’s winter adventures while keeping their feet warm. The added bonus? A sporty look and practical rip-tab.
They are easy to put on and take off, making them perfect for your outdoor adventures and everyday activities. The outsole provides good grip, following your movements!
BENEFITS
Easy dressing
Rip-tab and elastic laces to put them on and take them off easily.
Traction
Traction on snow thanks to the location and depth of the 3.5mm studs
Grip
SNOWCONTACT technology: optimum grip/traction on snow
Warmth
Comfort temperature: -4°C Limit temperature: -13.5°C
Waterproof
Breathable, waterproof membrane to keep your feet dry
TECHNICAL INFORMATIONS
How can I be sure that my boots are 100% waterproof?
Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very thin component applied to the inner surface of the fabric that prevents water from entering while allowing moisture to escape.
We tested this product in a laboratory simulating walking with the feet half immersed.
This model of shoe has been tested for up to 8,000 flexes, which is equivalent to 16 km of walking.
Will these boots be warm enough for your child’s winter hikes?
We carry out comparative studies in a thermal laboratory in walking conditions in low wind (5km/h). This is how we measure the thermal resistance of our boots. However every individual feels the cold differently.
Comfort temperature: felt slightly cold & 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold & 10% of users consider the thermal sensation acceptable on their feet.
Will your boots withstand regular use over the long-term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
How does the SNOWCONTACT technology used on the boot sole help me?
SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. Products (spray or liquid) for this purpose are available in our stores.
How do I choose the right footwear for snow hiking?
To gear up in the winter, we recommend you follow the following principles :
Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool)
Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimise moisture.
Boot height: adapt the height of the sock to the height of the upper and preferably choose high models if you want more protection.
How to dry the inside of your shoe.
Shoes can become heavy while they’re being worn in the wet (condensation and perspiration)
If your boots are very wet, we advise you to remove the insole, fill the upper with balls of newspaper and change them regularly. The paper will pump out moisture and speed up drying.
Never put the shoes too close to a heat source, but leave them in a warm, dry and ventilated place.
Is the tightening different depending on the size, like on other models?
No, the type of tightening remains the same for all sizes (UK Jnr sizes 7-5).
composition
composition
Lining and sock of: 30.0% Polyester, 40.0% Polyamide, 30.0% Polyester; Upper of: 35.0% Polyurethane, 20.0% Polyester, 20.0% Polyester, 25.0% Polyester; Outer sole of: 100.0% Synthetic Rubber
Tips for storage and maintenance
Storage tips
Store your products in a well-ventilated room away from light and moisture.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Body shape (in particular from 3D analysis) Movement science Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences In particular, we test the holding of seams, gluing, toxicology, resistance to UV and abrasion.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our field test engineer, our product manager, as well as a panel of testers test the products throughout their development until they are marketed.
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 16% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 3% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled rubber
Product made from 14% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 26%.