WATKO
Ref.
8542680
2710972
INFLATABLE WATER POLO GOAL WATGOAL 2.15 M X 0.75 M 500
€260.00
Tax included
Store Availability
Store Availability
Designed for experienced players or teams looking for a light and compact goal for water polo.
BENEFITS
Compact design
Once deflated and folded, the goal fits in a 30L volume backpack.Easy assembly / dismantling
Inflation in less than 1 min using a 5.2L pump.Lightweight
The goal will be easy to move and install thanks to its weight of 2.8 kg.TECHNICAL INFORMATIONS
DIMENSIONS AND ADAPTABILITY
The goal is 215 cm wide and 75 cm or 90 cm high. In configuration 215 x 75 cm, it complies with the official dimensions for U9 (under 9 years old), U11 and U13 age categories.
The goalposts are circular with a 12 cm diameter.
Caution: the age categories may differ between countries.
The goal allows you to play on 2 different heights of 75 cm or 90 cm by reversing the goal and moving the tension strap located at the base of the goal.
The goalposts are circular with a 12 cm diameter.
Caution: the age categories may differ between countries.
The goal allows you to play on 2 different heights of 75 cm or 90 cm by reversing the goal and moving the tension strap located at the base of the goal.
ASSEMBLY
INFLATION
The goal must be inflated using a 7 psi (0.48 bar) pressure pump through the "Boston" type valve on the goal. We recommend using a 5.2 l pump sold at DECATHLON (reference 8243066 or 8387583).
PUMP NOT PROVIDED.
FASTENING
The goal can be attached to the edges of a pool using ropes, or by weighing it down using the 3 weight bags and the 3 x 5-metre ropes provided.
The goal must be inflated using a 7 psi (0.48 bar) pressure pump through the "Boston" type valve on the goal. We recommend using a 5.2 l pump sold at DECATHLON (reference 8243066 or 8387583).
PUMP NOT PROVIDED.
FASTENING
The goal can be attached to the edges of a pool using ropes, or by weighing it down using the 3 weight bags and the 3 x 5-metre ropes provided.
RESISTANCE
The inflatable parts of our goal are made from a TPU bladder surrounded by a Tarpaulin sleeve (mixture of several layers of PVC and fabric).
This makes the product highly resistant to external factors and ensures the goal keeps its rectangular shape.
This makes the product highly resistant to external factors and ensures the goal keeps its rectangular shape.
DISASSEMBLY
Fully unscrew the top cap of the valve then partially unscrew the bottom of the valve and allow air to escape for about 1 minute.
WARNING: You will hear a very loud noise if you unscrew the bottom of the valve too quickly.
WARNING: You will hear a very loud noise if you unscrew the bottom of the valve too quickly.
CARE ADVICE
Our product has been designed so that it can be repaired by the customer. If you notice a leak, simply open the 2 zips and remove the bladder to locate the puncture.
We provide 6 self-adhesive patches, 1 spare "Boston" valve and a 9 m cord to repair the product.
We provide 6 self-adhesive patches, 1 spare "Boston" valve and a 9 m cord to repair the product.
composition
composition
Main fabric: 75.0% Polyvinyl Chloride, 25.0% Polyester; Bladder: 100.0% Thermoplastic Polyurethane; Net: 100.0% Polyester
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Dry before storage.
TESTS AND WARRANTY
Warranty
2 Years