Filters 0
Filters 0
WATKO Ref. 8758943 4563290

INFLATABLE WATER POLO GOAL WATGOAL 2.5 M X 0.8 M 550

€390.00
Tax included
de_modelcolor: GREY / BLACK
  • GREY / BLACK
Not available online

Store Availability

Designed for intermediate players or teams looking for a light, compact and rigid goal for water polo.

BENEFITS

Compact design

Once deflated and folded, the goal fits in a backpack.

Easy assembly / dismantling

The water polo goal can be inflated in 1 minute with a 5.2 l pump.

Lightweight

The goal is easy to move and install thanks to its light weight of 3.8 kg.

Rigidity

The goal is reinforced by hoops in order to withstand the force of shots by adults.

Instructions


TECHNICAL INFORMATIONS

DIMENSIONS AND ADAPTABILITY

The goal is 250 cm wide, 80 cm high and 92 cm deep.

This water polo goal has the official dimensions for beach water polo. The structure is reinforced by additional hoops that are not deformed by the impact of shots by adult players.

It can be used to play water polo anywhere: in a pool, a lake or the sea. The goalposts are circular with a 12 cm diameter.


ASSEMBLY

INFLATION

The goal must be inflated using a 7 PSI (0.48 bar) pressure pump via the "Boston" type valve installed on the goal. We recommend using a 5.2L pump sold at DECATHLON (reference 8243066 or 8387583).

PUMP NOT PROVIDED.


INNOVATIVE WEIGHTING

The goal is attached using ropes or an innovative system of weights.

To weigh it down effectively, fill the bags with stones or sand up to the limit to reach a weight of about 15 kg.

Each bag is then inflated in order to swim to the pitch. This makes it easier to position the bags around the pitch. Once the weights are in position, deflate them so that they descend to the bottom.

RESISTANCE

The inflatable part of our goal is made of three bladders: the main bladder is connected to the two hoop bladders by a ONE pump system that is used to inflate all the bladders through the main valve.

Each TPU bladder is enclosed in a tarpaulin protective sleeve (a mixture of several layers of PVC and fabric).



This makes the product highly resistant to external factors and ensures the goal keeps its rectangular shape.

DISASSEMBLY

Fully unscrew the top cap of the valve then partially unscrew the valve at the foot of the goal to allow air to escape for about 1 minute.



PLEASE NOTE: You will hear a very loud noise if you unscrew the bottom of the valve too quickly.

CARE ADVICE

Our product has been designed so that it can be repaired by the customer. If you notice a leak, simply open the two zips surrounding the punctured bladder and remove the bladder to locate the puncture.

A repair kit (patch + spare valve + rope) is provided.

We also supply a video of instructions that shows how to extract the bladders from their protective sleeves in order to apply the patch and repair the goal.

composition

composition

Frame: 75.0% Polyvinyl Chloride, 25.0% Polyester; Bladder: 100.0% Thermoplastic Polyurethane; Net: 100.0% Polyester; Webbing: 100.0% Polypropylene; Carry bag: 100.0% Polyester

Tips for storage and maintenance

DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C. DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT. MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C. IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT. MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C. IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.

Storage tips

Dry before storage.

TESTS AND WARRANTY

Warranty

2 Years