DREAMSCAPE
8344270
Non-Slip Adhesive Pads for Snowboards.
€8.00
€6.00
The lowest price in the 30 days before the discount was €8.00
VAT included
Store Availability
Store Availability
Pads to prevent the foot from sliding on the snowboard, when taking a ski lift for example.
BENEFITS
Traction
Structures with contours for maximum grip of the shoe on the pad.
Grip
3M Scotch tape for a very good bond between the pad and the board.
Grip
Non-slip material so that the boot does not slip on the pad.TECHNICAL INFORMATIONS
Advice on gluing the pad to the board
It is important that you take 4 minutes to stick the pad down properly.
1. Before gluing, clean the board well with a damp sponge and soap or dish soap to degrease it.
2. Rinse thoroughly to remove any soap.
3. Dry with a cloth.
4. Stick the pads where you want them, near the rear binding.
1. Before gluing, clean the board well with a damp sponge and soap or dish soap to degrease it.
2. Rinse thoroughly to remove any soap.
3. Dry with a cloth.
4. Stick the pads where you want them, near the rear binding.
Choice of the position of the pads
Place the 4 pads where you will put your foot when you take the chairlift.
Before gluing, think about simulating a chairlift ride to find the area where your back foot is to be positioned.
Caution! Do not glue the pads within 4 cm of the screw inserts, otherwise you will no longer benefit from the maximum setting of the bindings.
Before gluing, think about simulating a chairlift ride to find the area where your back foot is to be positioned.
Caution! Do not glue the pads within 4 cm of the screw inserts, otherwise you will no longer benefit from the maximum setting of the bindings.
Tips for storage and maintenance
TESTS AND WARRANTY
Warranty
2 Years