SUBEA
Ref.
8301066
1811263
Diving shoes 3 mm neoprene black
€19.50
Tax included
Store Availability
Store Availability
Our development teams—and fellow divers—developed these 3 mm boots for scuba divers.
BENEFITS
Thermal insulation
3 mm neoprene, glued and blind-stitched (GBS) waterproof seams.Grip
Ink under the sole for grip and added strength.TECHNICAL INFORMATIONS
Thermal insulation and assembly
3 mm neoprene.
The seams of the foot pocket are waterproof due to GBS assembly (Glued and Blind-Stitched): the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).An ink zone is printed under the sole to increase the strength and grip of the boots.
The seams of the foot pocket are waterproof due to GBS assembly (Glued and Blind-Stitched): the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).An ink zone is printed under the sole to increase the strength and grip of the boots.
Choose the right size
Try them on with your fins. The fit should be as tight as possible.
Certification
These scuba diving boots provide thermal protection that has been tested by the independent INPP institute (Marseille, France) in order to validate their compliance with the current standard (EN 14225-1:2017)
composition
composition
Foam core: 100.0% Rubber; Lining: 100.0% Polyamide
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE 95°C. NORMAL TREATMENT.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Store in a well ventilated place away from heat sources.
TESTS AND WARRANTY
Test product
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
Warranty
2 Years