Sun protection
Perfect for sun protection while swimming and doing water sports.
PROFILTER UV protection component
The knit of the TRIBORD UV TOP blocks at least 98% of UVB radiation and 95% of UVA (UPF 50+). This guarantees effective protection from the sun.
It can be used both in and out of the water, for water or nautical sports.
There is ceramic built into the fabric to reflect UV rays.
Protects from chafing
Protects against rubbing and chafing due to contact with the surfboard or bodyboard.
It may also be used under a wetsuit to protect from chafing, particularly around the neck.
Sandproof Component
The product's knit reduces sand being retained in the fabric.
The product's knit reduces sand being retained in the fabric.
The polyester component dries faster than polyamide (component normally used in swimsuits)
PROFILTER label:
DOWNLOAD the full user guide here
What does UPF 50+ mean?
UPF is a sun protection factor (Ultra Violet Protection Factor) and is standardised worldwide. It defines the protection level of a fabric and more precisely the proportion of UV rays it lets through.
To meet the standards, it must block at least 95% of UV rays.
. UPF 40 means that the fabric blocks 95% of UVB and 97% of UVA rays.
. UPF 50+ means that the fabric blocks at least 95% of UVB and 98% of UVA rays. This is the most effective protection.
Tips for storage and maintenance

ANY TYPE OF IRONING ALLOWED.

MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.

IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.

MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.

IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
The UV protection T-shirt folds up into a ball in the pocket inside the collar
TESTS AND WARRANTY
Test product
Designed and tested by our teams in Hendaye, France.
The Tribord global design centre is located on the banks of the Bidassoa in Hendaye. This allows us to design products in contact with users and in the marine environment.
Warranty
2 Years
Agree by
All of our sun protection components are laboratory tested by our engineers. They meet the current standard: EN 13758.
We conduct tests on all of the materials used before starting production. We also have our own measuring equipment in our laboratories to supplement the tests conducted in external laboratories. The products are laboratory tested when wet and dry as well as in use whilst worn (with the stretch that occurs during use).