This belay system makes it easy to brake a fall because the belayer pivots upwards and pinches the rope. It can be easily released by tilting the brake downwards with your thumb.

This belay is halfway between 1 conventional belay and 1 assisted-braking belay.

Please note: always keep your hand on the rope.

It is recommended to use an HMS Bruce Steel FG, HMS Strike FG or

HMS Strike Slider FG carabiner. If you opt for another

carabiner, make sure to use one with an HMS locking mechanism (pear-

shaped), with anti-torsion, if possible, and make sure that

the belaying device is in contact with the large side of the carabiner. A

straight/pointed carabiner in contact with the belaying device can hinder braking

Cleaning: Dirtied products must be clean with warm water (if necessary

with a neutral soap) and dried away from a source of heat. Do not use chemicals.

For more details, refer to the instructions for use.

Store the product in a cool and dry, away from daylight

, outside of carry boxes. Avoid all contact with chemical

substances (warning: acid build-up!)

For more details, refer to the instructions for use.