Volume: 23 litres/Weight: 520 g/Full pack dimensions (cm): H 44 x W 28 x D 18
Pockets: 2 outer, 1 inner; 1 inner compartment.
Foam-padded back and straps. Stowable belt. Chest strap. Thumb loops.
Backpack technical tests.
Backpack components are approved in laboratory tests, including fabric, buckles, webbing, foam, zips, etc. Fabrics are tested for resistance to wear, tearing, colour-fastness in UV rays, washing, waterproofing, etc. A final test on the finished product simulates the kind of treatment to which it will be subjected over several years, to assess the strength of the assembly The backpack is weighted, then placed on a dummy which reproduces the movement of fast walking through thousands of cycles.
10-year guarantee, technical partnership
The Strenfit component brand, Quechua's partner for researching and testing its components and assemblies, conducted tests simulating backpack ageing. These tests were conducted on the components, the seams, and the finished product. 10-year guarantee, conditions.
10-year guarantee, conditions
The guarantee covers backpack defects, excluding those resulting from normal wear and abnormal use. This special 10-year guarantee will only be granted upon presentation of the product and sales receipt. If the product is under guarantee, it will be repaired or exchanged for free. This commercial guarantee does not affect any statutory guarantees that are applicable in the country of purchase.
How is backpack volume measured?
The volume of each backpack is measured using a standardised method: we fill the main compartment as well as each pocket with little balls. Then we empty these balls into a graduated container, which gives the equivalent volume in litres.
A score for comparing products' environmental impact
The product's environmental impact is calculated across its entire life cycle using different indicators. An overall ABCDE score is attributed to help you more readily identify the products with the best environmental performance by comparing the same type of product (T-shirts, trousers, backpacks, etc.)
Decathlon is committed to visually displaying environmental information.
For more information visit http://sustainability.decathlon.com/
How to adjust your backpack
FIRST, LOOSEN all straps (shoulder straps, belt, load adjuster straps). PUT THE BACKPACK ON. For backpacks with a capacity of 50 L or more, PLACE THE HIP BELT CORRECTLY (it should sit over the pelvis) and TIGHTEN IT. For smaller backpacks, the hip belt should be placed around the waist. TIGHTEN THE SHOULDER STRAPS. Finally, ADJUST THE LOAD ADJUSTER STRAPS as needed.