WATERPROOFING
- 3-layer hydrophilic component.
- >10,000 of water pressure after 5 washes
- 100% taped seams.
- Three-way adjustable hood with shape memory malleable edge.
- Wrists fitted with dual, adjustable cuffs.
- Central opening with storm flaps and water drainage channel.
BREATHABILITY
RET <15: average breathability.
To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.
Pockets
- Storm pocket with an inner opening and guides for a headphone cable.
- 2 handwarmer pockets with a removable 300 g fleece lining to speed up their drying time.
- 2 cargo pockets equipped with a storm cord and a large ring for the circuit breaker.
REFLECTIVE
- Heat-sealed reflex patch (EN471) intensifying sources of light.
FEATURES
- Intuitive double adjustment at collar for optimal neck protection.
- Very high collar lined with 300 g fleece.
- Jacket has an adjustable waist fastened by the adjuster built into the gusset pockets.
- Bottom of the jacket adjustable with the jacket closed.
- Inner powder skirt with silicone grip for a better hold on the salopettes.
- Two-way zip.
HOOD
Completely depth and height-adjustable hood.
Semi-rigid visor integrated into the hood to provide even more protection.
The high neck effectively protects the lower part of the face.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY
step 1: before washing
Close all zips and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.
Then turn the garment inside out to wash it.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY
step 2: washing
You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach.
Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.
Very important: select a thorough rinse or double rinse to completely remove all detergent residue.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY
step 3: drying
Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.
Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY
If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a waterproofing spray.
Weight
1185 g in EU size 40
Tips for storage and maintenance

ANY TYPE OF IRONING ALLOWED.

MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.

DO NOT TUMBLE DRY.

MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.

IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Store in a dry place, but do not leave your garment on a heat source such as a radiator, as this may damage the breathable membrane or coating.