Dinghy 500 Men's Sailing GBS 3/2 mm Neoprene Wetsuit - Black/Orange

By trapping a thin layer of water around the body, a neoprene wetsuit works in two ways:

1. the water trapped inside the wetsuit gradually warms up

2. heat transfer from the body decreases.

The wetsuit and the thin covering of water form a layer of insulation.



Neoprene is a closed-cell elastomeric foam with trapped nitrogen bubbles that have insulating properties.

The Tribord DG500 neoprene wetsuit is made of 100% neoprene (thickness: 3 mm) to ensure optimal thermal insulation.



All seams are sewn together with strong thread suited to this particular type of fabric and are glued to prevent water getting through the seams (GBS).

A strip of neoprene is sewn under the zip to reduce the cooling effects of any water that gets through it.



In the event of moderate to strong winds and cold weather, also wear the Tribord S500 sailing smock

The Tribord DG500 dinghy/catamaran neoprene wetsuit has a cut and materials designed to make sailing manoeuvres and changing positions much easier.



The arms and chest piece consist of a different piece of fabric to make manoeuvres and movements much easier.

The legs, buttocks and knees are also separate pieces to make sitting, crouching and changing sides in the boat much easier.



All the seams are stretch seams.

It is reinforced on and below the knees and on the seat and thighs. Thickness is 7mm on the knees for added comfort.

The additional fabric works in two ways:

- to reduce the wear and tear of the neoprene in areas smost exposed to rubbing and chafing from the boat (deck fittings, rubbing strake, carpet, etc., depending on the supports)

- to reduce the inconvenience of this rubbing and chafing on the knees, buttocks and thighs for the user, who is wearing the suit and is active on the boat

The neck finish and height have been developed to limit the sensation of discomfort from the neoprene and irritation on even the most sensitive skin.

However, not everyone's skin reacts in the same way: in this case, we recommend that you wear a top under the wetsuit to reduce sensitive rubbing and chafing.

Thanks to the neoprene adhesive (see link), you can repair your wetsuit by following the steps shown in the video (see link).