SOFT 100 Adult Swimming Goggles - Clear Lenses - Blue / Pink
Store Availability
Store Availability
BENEFITS
Anti-fogging
Enjoy swimming with clear vision, thanks to the anti-fog treatment.
Field of vision
Benefit from the best field of vision available within the range: over 160°
Adjustable
Adjust goggles with the help of the notched strap on the rear buckle.
Stability
Benefit from good support on these swimming goggles.
Waterproof
No water getting into goggles, thanks to soft joints to create watertight seal.
TECHNICAL INFORMATIONS
REDUCE FOG IN YOUR SWIMMING GOGGLES
Fog develops due to several factors: the difference in temperature between the body and the way, humidity levels, etc. Wear and tear due to friction is one of the main causes.
If your goggles fog up, dip your lenses in the water and a protective film will reform.
After a certain amount of time, it is normal for the performance of the anti-fog coating to be diminished.
We provide an anti-fog marker that reactivates an ageing anti-fog treatment and which makes your goggles last longer.
CHOOSING THE SIZE OF YOUR SWIMMING GOGGLES
The watertightness of the swimming goggles is dependent on the proper fit of the skirts with the shape of your face. Before purchase, we advise you to do the "suction" test with your goggles without the elastic strap:
If the goggles stay on your face by themselves, with slight suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on your face.
This model is available in sizes S & L(narrow & rounder faces).
ADJUSTING YOUR SWIMMING GOGGLES
These swimming goggles fit the morphology of your face without needing to be over-tightened.
Goggles that are too tight can cause discomfort, leave marks and even create water inlet holes.
It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes.
The straps ideally should rest 2 to 3 cm above your ears. This position will optimise the grip and comfort of the goggles.
LOOKING AFTER YOUR SWIMMING GOGGLES
We advise you to:
- Rinse your goggles (only if necessary) by dipping them in the water
- Avoid water jets directly on the inner face of the lenses
- Store the goggles in their case between sessions to avoid damaging the lenses (on the inner face to protect the anti-fog treatment, on the outer face to avoid scratches)
- Avoid exposing the goggles to temperatures over 60 °C,
- Do not touch or wipe the inside of the lenses
LENS TINT
The colour of your goggles should be suited to your swimming location and its lighting.
If you swim outdoors or in a pool with harsh lighting, prioritise goggles with smoked lenses to limit the glare.
If, however, the pool is quite dark with low lighting, winter evenings for example, use clear lenses.
The SOFT swimming goggles are available with two different lens tints (shaded and clear).
UV PROTECTION
Complies with standard: Q/BT 4734 - 2014, all Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint.
Looking directly at the sun is dangerous and can lead to irreversible eye damage.
composition
composition
Frame (for skiing): 100.0% Thermoplastic Polyethylene; Strap: 100.0% Silicone; Lens (for diving): 100.0% Polycarbonate; Buckle: 100.0% Polycarbonate
Tips for storage and maintenance
Storage tips
After use, store the goggles in their case.<br /> Important: Do not touch the inner surface of the lenses as this could destroy the anti-fog treatment
Restrictions on use
Don’t touch the inside of the goggles (damages anti-fogging).
TESTS AND WARRANTY
Test product
These goggles were approved by beginner swimmers who used them in a Nabaiji mission test in 2019 in Antibes, France. The Nabaiji swimming goggles comply with the EPI regulation 2016/425. Our products are tested and approved by independent laboratories. Goggles intended for swimming at the surface.
Warranty
2 Years
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
DesignMaterial consumption optimization
Optimisation of material consumption by 26% to reduce its environmental impact.
By optimising the design of this product, it was possible to reduce the amount of raw materials used without compromising the technical nature of the product.