Filters 0
Filters 0
QUECHUA Ref. 8757616 4579441

Men’s Winter Waterproof Hiking Parka - SH900 -20°C

€135.00
Tax included
Colour: BLUE
  • BLUE
  • BLACK
  • KHAKI
Size guide My size is :
Not available

Store Availability

Make the most of the huge snow-covered areas! This ultra-warm and protective parka is the ideal jacket for hiking in the cold, snow and wind, down to -20°C

BENEFITS

Easy opening / closing

2 comfort zips at the bottom of the jacket letting you bend over or sit down

Ease of use

Zips and press studs that are easy to use with gloves Inside mesh pocket

Warmth

Double wadding lining (2 X 200g/sqm) on the body. 200 g/sqm layer on the arms

Waterproof

Waterproof membrane 15 000 mm H²O (Schmerber). 100% taped seams

Pockets

2 handwarmer pockets, 2 high zipped pockets, 1 secure inner pocket

Limits snow entering

Anti-blizzard hood (synthetic fur), cuffs, waist tightening

TECHNICAL INFORMATIONS

A comfortable, unique style extreme cold jacket

We designed this jacket with a comfortable fit so that it could be worn with a warm second layer such as fleece or light down jacket.

Its longline parka style is ideal for protecting you from the cold and wind during your winter hikes in large hilly areas or in the mountains.

A practical jacket with smart details

Practical and smart details: 2 hand warmer pockets, 2 outside pockets with flap, 1 secure inside pocket, 2 inside mesh pockets to have everything close at hand.

The main zip has a long zipper pull and press studs and thumb pass so you can open or close your jacket while keeping your hands tightly snug in your gloves. The 2 easy zips at the bottom of the jacket allow you to bend or sit down comfortably.

Can I be sure that my jacket is warm enough for my winter hikes?

We developed your jacket for intense wintry conditions: intense cold, snow, blizzards. The insulation is provided by thick wadding made of a synthetic component that insulates by trapping air in its fibres (double layer on the body and single layer at the arms).

We added a long inner flap underneath the zip to stop cold air from entering. The system is supplemented by a drawcord at the hem to make the jacket comfortable down to -20°C.

COMPONENT WATERPROOFING OF THIS JACKET

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerber or mm H²0 (pressure exerted by a column of water). The higher this number, the more waterproof the fabric.

This jacket has a waterproof component (JIS 1092 standard) resistant to 15,000 mm H²0 (Schmerbers) before washing.

How does my jacket protect me from outdoor conditions?

Your jacket is designed with a waterproof outer component that keeps out water and wind. To keep you warm in winter you must also protect your extremities (head, hands, feet). The anti-blizzard hood with detachable synthetic fur, wrist sleeves and a rising collar prevent cold infiltration. The high handwarmer pockets with fleece lining are perfect for protecting your hands in a comfortable position.

How to dress properly for snow hiking?

To dress properly in winter, whatever your activity, we recommend using the 3-layer principle:

layer 1: The high-tech base layer transfers moisture away from the body to keep your skin dry.

layer 2: The second layer (fleece, sweater) provides warmth and transfers moisture outwards.

layer 3: The jacket protects you from the outdoor conditions: rain, snow, wind.

The whole outfit must be breathable in order to eliminate moisture.

How to preserve the technical qualities of my jacket?

A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Products (spray or liquid) for this purpose are available in our stores.

WATERPROOFNESS OF THIS JACKET

The waterproofness of a jacket isn’t limited to just its components: the assembly technique of the different parts is also an evaluation criterion.

Whether heat-sealed or sewn then waterproofed, the overall waterproofness of your jacket is measured using a shower test developed by Decathlon, which simulates rain of different intensities.

As such, this waterproof jacket protects you from a downpour, i.e. 12 cm of rain in 2 hours.

Will my jacket withstand regular use over the long-term?

To ensure the durability of our products, we perform tests on the selected components: resistance to rubbing and abrasion, colour fastness, resistance to repeated washing. All these tests have been carried out on the component on your jacket.

composition

composition

Main fabric: 100.0% Polyester; Filling: 100.0% Polyester; Lining: 100.0% Polyester; Synthetic fur: 92.0% Acrylic, 8.0% Polyester; Cuff: 20.0% Elastane, 80.0% Polyamide; Coating: 100.0% Polyurethane

Tips for storage and maintenance

MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT. MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED. BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C. DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON. DO NOT IRON.
DO NOT DRY CLEAN. DO NOT DRY CLEAN.

Storage tips

We advise you to wash your jacket with the zip closed.<br /> Always make sure that this waterproof garment is completely dry before storing it.

TESTS AND WARRANTY

Test product

All our products are tested in the field by user representatives and these tests are run in parallel to our laboratory tests. By conducting this comprehensive and demanding dual testing process, the technical features and design of our QUECHUA products is being continually improved. Your regular feedback is also taken into account to constantly improve our range.

Warranty

2 Years

Ecodesign approach

With ecodesign, we reduce the environmental impact of our products.

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

Ecodesign actions on this product
  • Picture showing Dope dyed
    Process

    Dope dyed

    Product made from 9% dope dyed yarn

    Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.

  • Picture showing Recycled polyester
    Material

    Recycled polyester

    Product made from 66% recycled polyester

    Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.

Learn more about our approach