WEDZE
Ref.
8800155
4839330
Ski boot volume reducer - 3mm.
€7.00
Tax included
Store Availability
Store Availability
Helps reduce the excess volume inside your ski boots and improve support.
BENEFITS
Anatomic design
Helps reduce the excess volume inside your ski boots. Thickness: 3mm.
Compatibility
2 sizes (2/7 and 7/12). Compatible with all ski boots.
Customisation
Can be cut to the shape of the insole using scissors.
Precision
Provides support and precision when your boots feel too big.TECHNICAL INFORMATIONS
What is a reducer used for?
Are you between shoe sizes or have your liners got a bit thinner and you can feel your foot moving inside your boot?
This 3 mm reducer elevates the foot inside the ski boot, thus reducing the internal volume.
It's a very simple device but it's very effective.
If there is a lot of extra volume inside your boot, you can use 2 reducers, one on top of the other.
This 3 mm reducer elevates the foot inside the ski boot, thus reducing the internal volume.
It's a very simple device but it's very effective.
If there is a lot of extra volume inside your boot, you can use 2 reducers, one on top of the other.
Which size?
This 3mm reducer comes in 2 sizes: 2/7 and 7/12.
You just need to choose the correct size range. If you take a size 7, go for the 7/12
You just need to choose the correct size range. If you take a size 7, go for the 7/12
Instructions
Remove the shell liner.
Remove the insole from the liner.
Place the insole on top of the reducer. Using a pencil, trace the shape of the insole onto the reducer.
Cut around this shape using a pair of scissors.
Place the reducer, followed by the insole, inside the liner.
Then replace the liner inside the shell.
Remove the insole from the liner.
Place the insole on top of the reducer. Using a pencil, trace the shape of the insole onto the reducer.
Cut around this shape using a pair of scissors.
Place the reducer, followed by the insole, inside the liner.
Then replace the liner inside the shell.
composition
composition
Foam: 100.0% Polyethylene
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Dry your boots before storing them. Store them with the hooks closed in a ski boot bag in a warm room.
Restrictions on use
Do not dry on a radiator.
TESTS AND WARRANTY
Test product
All Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under the same real-life conditions of use that you will experience. The design teams ensure that the programme for which the product has been designed and developed matches perfectly with its use in the field.
Warranty
2 Years