ROCKRIDER
Ref.
8819889
4945581
All-Mountain Enduro Knee Pads FEEL D_STRONG D3O®
€65.00
Tax included
Store Availability
Store Availability
These knee pads were designed for All Mountain and Enduro riders looking for protection and comfort while riding
BENEFITS
Moisture management
Lightweight, breathable components at the folds in the knee.Easy dressing
Stretch components and vertical orientation of silicone bandsFreedom of movement
Flexible pre-shaped components that don't restrict your movementAbrasion resistance
Front components that are highly resistant to friction and brush.Impact protection
D3O® LP1 L1, Type A, Level 1-certified pre-shaped protection.Stays in place
55mm wide silicone band that adjusts at the thighs.TECHNICAL INFORMATIONS
In a nutshell
CE certification: Complies with Regulation (EU) 2016/425, which applies to personal protection equipment.
Protection technology: D3O®
Protection type: Soft pads, LP1 L1, Type A, Level 1 certification
Closure: elastic and rip-tabs
Protection technology: D3O®
Protection type: Soft pads, LP1 L1, Type A, Level 1 certification
Closure: elastic and rip-tabs
IMPACT PROTECTION TECHNOLOGY
D3O® LP1 L1, Type A, Level 1 certified pre-shaped protection.
Ergonomic and flexible while pedalling, they harden on impact to keep you safe.
Additional side coverage made from D3O® XTi material that protects you from impacting the bike's frame on the inside and provides extra protection against friction on the outside.
Ergonomic and flexible while pedalling, they harden on impact to keep you safe.
Additional side coverage made from D3O® XTi material that protects you from impacting the bike's frame on the inside and provides extra protection against friction on the outside.
GUARANTEED TO STAY PUT
Wide 55mm silicone band to prevent the knee pad from slipping down your leg, elastic at the calf and elastic/rip-tab on the thighs to adjust the fit.
FORGET YOU'RE WEARING THEM AND RIDE!
Flexible, pre-shaped components that don't restrict your movement while riding.Light, breathable components on the back of the knee for perspiration wicking.
A TOUGH PRODUCT
Reinforced component on the main protection zone. Front and side components that are highly resistant to friction and brush.
EASY TO PUT ON AND TAKE OFF
The stretch components and vertical design of the silicone bands reduce friction with thorns.
The knee pads have an orientation (right or left) with the rip-tab on the outside for easier adjustment.
The knee pads have an orientation (right or left) with the rip-tab on the outside for easier adjustment.
REUSABLE PACK
The packaging was designed to be reused before and after riding:
1. for optimal washing (make sure to remove the pads before each cycle)
2. for long-term storage, protecting them from mould and mildew
3. for transport, preventing the rip-tabs from damaging other products
1. for optimal washing (make sure to remove the pads before each cycle)
2. for long-term storage, protecting them from mould and mildew
3. for transport, preventing the rip-tabs from damaging other products
composition
composition
Foam part: 100.0% Polyurethane; Main fabric: 12.0% Elastane, 88.0% Polyester; Side fabric: 12.0% Elastane, 88.0% Polyamide; Lining: 35.0% Elastane, 65.0% Polyamide; Protection cover: 10.0% Polyurethane, 90.0% Thermoplastic Polyurethane; Elastic band: 71.0% Polyester, 29.0% Latex Rubber
Tips for storage and maintenance
ANY TYPE OF IRONING ALLOWED.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Do not store the D30® folded, especially in cold weather. This may cause them to break.<br />
Store the knee pads in a dry, ventilated place.<br />
Avoid storing them in damp spaces.
Restrictions on use
Not suitable for sports other than MTB
TESTS AND WARRANTY
Test product
At Decathlon, all of our products are tested by a panel of users in the conditions for which the products were designed. These tests are led and monitored by our design team. All of these tests allow our product managers, engineers and the whole mountain biking team to develop, create and design technical products that guarantee customer satisfaction.
Warranty
2 Years
Agree by
More than 20,000km ridden by the MTB Design team based in Passy, in the valley at the foot of Mont Blanc.