Jacket Raincut 1/2 Zip

The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.

This jacket is designed with a waterproof coating (JIS 1092 standard): this component resists 5,000 mm H20 (Schmerbers) before washing (equivalent to the pressure exerted by a 5 metre column of water).

The fabric of our product is very breathable -12 RET.

Component breathability is measured by its thermal evaporative resistance (RET”. This is its capacity to let out water vapour produced by the body during activity. The lower the Thermal Evaporative Resistance (RET) coefficient, the more breathable the fabric.

RET ≤ 9: extremely breathable fabric;

RET ≤ 12: very breathable fabric;

RET ≤ 20: breathable fabric ;

RET ≤ 20 : little or non-breathable fabric.

To maintain a robust water-repellent fabric, we recommend reactivating it regularly.

Do this every three washes (it is important to rinse abundantly) or after a dozen uses in the rain.

You can easily reactivate the water repellent property by warming the fabric:

- with your tumble dryer for 15 minutes (synthetic programme);

- with a hair dryer at a distance of 20 cm, going back and forth twice;

- or twice over with an iron on a delicate setting without the steam function.

This rain jacket was designed for a 2-hour hike at a pace of 5 km/h max., without elevation gain.

During sports activity, the extent to which we perspire depends on the intensity or the duration of physical effortIf the breathability of the fabric is not adapted to the type of physical activity, the perspiration vapour condenses inside the jacketYou feel dampIt is not rain coming through but perspiration vapour condensingYou need to choose a rain jacket according to the type of physical activity