Last chance

Men's Ski Jacket - FR500 - Terracotta

Name: MEN'S SKI JACKET - FR500
Availability: OutOfStock

This waterproof jacket excels off-piste, protecting you from powder whilst remaining breathable. Well insulated for extra warmth and a relaxed fit for a free flowing freeride.

ID 8610096

Sold and shipped by

How to get it

waterproof
15,000mm (Schmerbers) membrane and taped seams. Waterproof zip
breathability
The membrane, placed heat pads and ventilation help wick away perspiration
freedom of movement
Loose fit and stretch fabric that follow all your movements
warmth
Glued heat pads (100g/sqm wadding) protect you moderately where needed
limits snow entering
Helmet hood, storm cuffs and a snow skirt to face the winter
pockets
5 secure pkts: 2 hand, 1 chest, 1 inner, 1 ski pass, 1 mesh pocket
anatomic design
3D hood adjustment that can be put over the helmet and follows your movements
airing
Two large vents under the arms to lower the temperature after your runs

Description

Design details

Warmth and breathability technology
Positioned warm pads provide good thermal protection for your Freeride skiing days. This concept means you keep a wide area where the 3 layer membrane can wick away your perspiration. A perfect compromise between a completely padded jacket and 3 layer jacket with no extra warmth. Modularity is the key word for this jacket. It’s important to add a warmer or cooler second layer depending on the conditions.
Additional features
Helmet hood designed to offer maximum protection with freedom of movement. Adjustable to fit 3 sizes in a single movement, using a tightening system located behind the head. Tightening on the wrist and cuffs with thumb loop to prevent air and snow from getting in. Snow skirt that also reduces draughts and prevents snow from getting inside.
Ventilation
To stay dry, it is important to wear a waterproof jacket. But you shouldn't end up wet with perspiration. The vents play an important role in wicking away perspiration. This is why we have equipped this jacket with two zipped air vents with two large zipped under the arms (35cm in size L).
Cut
The loose fit and preformed sleeves free up your movements and let you ski in complete freedom. We designed this jacket with a component that has mechanical stretch. You can move freely while skiing.
Pockets
2 hand pockets with a waterproof zip. 1 inside chest pocket with watertight zip. 1 outer chest pocket with watertight zip. 1 pocket on the left pocket for your skipass with watertight zip. 1 quick access inner mesh pocket.
What should you wear under your skiing jacket?
To keep warm and dry, use the 3-breathable-layers rule: A ski base later and a second layer liner jacket to retain warmth, a third layer ski jacket to protect you from bad weather. The base layer keeps you dry by wicking away the perspiration from the skin to the other layers. The second layer provides warmth. Such as padded jackets or fleece sweaters.
The third layer
This layer provides protection from the outdoor elements (snow, rain and wind) by keeping them out (while still letting perspiration escape from inside so you don’t feel wet). It should therefore ideally be waterproof AND breathable. The third layer (or layer 3) can also provide insulation in the case of lined trousers or jacket and complement the second layer (or layer 2).
Water repellency
Water-repellent fabric allows water to run off its surface without seeping in. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.
Component waterproofing
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 10,000mm can therefore withstand the pressure exerted by 10,000mm of water.
Breathability of a component
The component of this jacket has a RET of 12. To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric 9 < RET < 12 = very breathable fabric 12 < RET < 20 = breathable fabric RET > 20 = little or no breathability.
What is a membrane or coated component?
The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more resistant and often more breathable than a coating.
How do we make a garment waterproof?
The waterproof properties of the garment are related to its fabric, seam sealing and assembly design. We then carry out shower tests on our garments.
Waterproofness/Shower test
This garment has been validated in a shower test under 100L of water/sqm/hour for 3 hours. This test reproduces the conditions of a heavy mountain storm.
How do we make a garment breathable?
In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh, etc.) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
Your product is repairable
For the two years of guarantee, if your product can be repaired, the repairs (hooks, seams, zips, etc.) are done free of charge. Beyond this period, they can still be done for a fee, locally at your usual shop.
What is the RECCO® system?
All our freeride ski jackets and trousers are equipped with the RECCO® system. With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
Tutorial on how to wash your waterproof garment
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment. Link: https://youtu.be/rh4GLwALgBM After three washes, restore the water repellent properties with a waterproof spray or wash-in product.
To help you choose the right size
The model is wearing a size L and measures 180 cm. Measurements: Waist size: 85 cm Hip measurement: 100 cm Chest size: 100 cm
WEIGHT
0.78kg in size L

Get the bundle

Men's warm and comfortable ski trousers, SNB 100-black

€42.00

Men’s warm and breathable ski jacket, FR500 - Dark Green

€180.00

2 colours

Men's Ski Jacket - FR500 - Terracotta

How to get it

Features

waterproof

breathability

freedom of movement

warmth

limits snow entering

pockets

anatomic design

airing

Description

Design details

Specifications

Details

Composition

EU product safety contact

Usage & care

Environmental impact

Get the bundle

Description

Design details

Specifications

Details

Composition

EU product safety contact

Specifications

Details

Composition

EU product safety contact

Usage & care

How to use

How to repair or replace

key 'ProductAssurance.warranty (en-IE)' returned an object instead of string.

Care instructions

Usage precautions

Storage

Cleaning

Environmental impact

Specifications

Details

Composition

EU product safety contact

How to use

How to repair or replace

key 'ProductAssurance.warranty (en-IE)' returned an object instead of string.

Care instructions

Usage precautions

Storage

Cleaning

Get the bundle