Marketplace -Online Only

Foam anti-noise sleeve for internal bike cables 6 mm × 1.6 m

Reduce cable noise and vibrations inside your frame with this dampening foam sleeve – flexible, easy to route and cut to the length you need.

Sold and shipped by Sportenzia

How to get it

Description

Dampening foam sleeve for internal bike cables

Reduce vibrations and cable noise inside your frame with this dampening foam sleeve. Designed to wrap around gear cable outers, hydraulic brake hoses and other cables up to 6 mm in diameter, it limits their contact with the internal walls of the frame and helps eliminate rattling and vibrations during your rides.

Technical specifications

Product: Dampening foam sleeve for internal cables
Quantity: 1 piece
Length: approx. 1.6 m
Inner diameter: approx. 6 mm / 0.23 inch
Outer diameter: approx. 12 mm / 0.47 inch
Material: Soft foam
Colour: Black
Compatibility: Cables and hoses up to 6 mm outer diameter

Key features

Internal noise reduction: the foam absorbs vibrations from cables and hoses inside the frame to limit rattling and unwanted noise during riding.
Frame protection: creates a soft layer between the cables and the internal walls to limit direct contact and friction.
6 mm inner diameter: compatible with many gear cable outers, brake cable outers and hydraulic hoses with an outer diameter not exceeding 6 mm.
Generous length: the 1.6 m sleeve can be cut to the required length depending on the internal routing of the bike.
Flexible foam: easily follows curves and direction changes inside the frame.
Good bend resistance: designed to be curved when routed through the frame without impeding cable flow.
Discreet installation: once fitted, the sleeve remains completely hidden inside the frame.

Compatibility

This sleeve is intended for cables, outers and hoses with a maximum outer diameter of approximately 6 mm. It can notably be used with:

Hydraulic brake hoses
Gear cable outers
Compatible mechanical brake cable outers
Cables and outers routed internally through the frame
Other internal cables compatible with the sleeve diameter

Vibration and noise reduction

Absorbs cable movement inside the frame tubes
Limits rattling of cables against internal walls
Reduces vibrations transmitted by rough terrain
Particularly useful on bikes with fully or partially internal cable routing
Suitable solution for bikes generating unwanted noise from the frame

Installation

Identify the cable, outer or hose to be protected inside the frame
Measure the required length and cut the foam sleeve if needed
Feed the cable or hose through the foam sleeve
Gradually insert the assembly into the frame, following the routing intended by the bike manufacturer
Check that the sleeve does not obstruct cables, hoses or moving parts
Check that brakes and gears function correctly after installation

Recommended uses

Mountain biking
Road cycling
Gravel riding
Electric bikes
Bikes with internal cable routing
Fitting or replacing hydraulic hoses
Fitting or replacing gear cable outers

Benefits

Reduces cable noise inside the frame
Absorbs vibrations
Protects cables and frame from direct contact
Compatible with cables and hoses up to 6 mm
Generous length of 1.6 m
Flexible and easy to route
Can be cut to the desired length
Completely invisible once inside the frame

Pack contents

1 × Black dampening foam sleeve 1.6 m

A simple and lightweight solution to effectively reduce rattling and vibrations from cables, outers and hydraulic hoses inside the frame, while providing additional protection against friction.

Foam anti-noise sleeve for internal bike cables 6 mm × 1.6 m

How to get it

Description

Specifications

Details

European Article Number

Brand

EU product safety contact

Description

Specifications

Details

European Article Number

Brand

EU product safety contact

Specifications

Details

European Article Number

Brand

EU product safety contact

Specifications

Details

European Article Number

Brand

EU product safety contact