Wi-Fi hunting camera PIE 1077

Name: Wi-Fi hunting camera PIE 1077
Availability: InStock

Its Wi-Fi function means you can adjust the settings and download shots remotely using the free TrailCam Go mobile app. Wide detection angle: 120°. Field of vision: 84°.

ID 8968225

Sold and shipped by

How to get it

image quality
Photo resolution up to 48 MP. Video resolution up to 4K.
fast acting
Shutter speed: 0.3 seconds.
distance
Motion detection at distances of up to 20 m (depending on conditions).
field of vision
120° detection angle and 84° vision angle.

Description

Design details

Features of this hunting camera (part 1/3)
Shooting angle: 84°. Wide detection angle: 120° in total. Shutter speed: 0.3 seconds. Micro SD card: 512 GB max (class 10 minimum). Not provided. choose from 3 capture modes: Photo: 1 to 5 photos per detection. Video: configurable duration from 5 sec to 10 min. Photo + Video: 1 photo then 1 video are captured per detection. Designed to be weatherproof (IP65). Compatible with external power sources (power supply or solar panel).
Further details on the PIE1077 (part 2/3)
The infrared flash on this model is invisible for photos and videos at night. Here are some details you should know: -34 invisible black LEDs -wavelength: 940 nm -adjustable infrared flash range: short, medium, long -maximum flash range: approx. 20 metres -infrared flash with automatic activation depending on brightness Photo resolution: configurable up to 48 MP Photo format: JPG Video resolution: up to 4K Video format: AVI
Additional information (part 3/3)
Weight: 277 g without batteries / 465 g with batteries. Dimensions: 141 x 96 x 84 mm. Power: 8 AA batteries (alkaline, lithium or rechargeable Ni-MH – not included). Compatible with external power sources (6 V/2 A). 2.0" TFT colour LCD screen. USB Type-C port for downloading files (download cable supplied). PIR sensors (motion and heat detectors). 1 central sensor + 2 side sensors. Adjustable detection sensitivity: Low | Medium | High.
Camera trap with Wi-Fi function
Using the free TrailCam Go app (available on Android and iOS), you can remotely: -view, download or delete recorded photos and videos -take photos or videos -change product settings -check remaining power and memory capacity The device essentially creates its own Wi-Fi network: you don’t need to be near a router. The Wi-Fi function is activated via Bluetooth from a smartphone.
More details on the 3 operating modes (part 1/2)
Motion detection mode: the camera takes photos and/or videos when the PIR sensors (motion/heat detectors) detect activity in the area they cover. Time Lapse Mode: photos or videos are taken automatically at regular, user-defined intervals. Here, the PIR sensors are deactivated (no motion/heat detection). If you set the interval to 30 minutes, the camera will take a photo or video every 30 minutes.
Let’s take a look at the third mode (part 2/2)
The final mode is Time Lapse + video. The camera automatically takes photos at regular user-defined intervals, then generates a video from the photos taken. In this mode, the PIR sensors are deactivated (there is no motion/heat detection). If you set the interval to 30 minutes, the camera will automatically take a photo every 30 minutes.
Which settings are configurable?
Configurable trap operating schedule: the device can be set to operate 24 hours a day or only during a time slot defined by the user. Configurable device name: useful for users with several devices, as it lets you know on which device (and therefore where) a photo was taken. The password can also be set.
Configurable settings on the PIE 1077 hunting camera (continued)
Photo timestamp: if set to ON, the following information is stamped at the bottom of the photos: date and time the photo was taken, ambient temperature, moon phase, battery level and camera name (if set). Loop recording: if set to ON, when the memory card is full, the camera will continue to record new photos/videos while deleting the oldest photos/videos.
Our installation tips (part 1/2)
1/ Install the device at a height of approx. 1.5 m/2 m, angled slightly downward. Choose a north or south-facing orientation. Do not point the camera east or west, as sunrise and sunset can cause false triggers, resulting in overexposed images. 2/ To monitor a trail, point the camera along the trail rather than perpendicular to it. This allows several animals to be seen at once if they pass in a line
Final words of advice on how to set up this camera trap
3/ Avoid mounting the device on a weak tree that may sway in strong winds. Choose a solid, stable surface. 4/ Clear away any branches or weeds in front of the camera. In windy conditions or high temperatures, they could cause false triggers. 5/ Check the battery status before installing the device. 6/ Insert the memory card. 7/ Check that the date and time are correct. 8/ Turn the selector switch to the "ON" position before you leave.

Wi-Fi hunting camera PIE 1077

How to get it

Features

image quality

fast acting

distance

field of vision

Description

Design details

Specifications

Details

Usage & care

Description

Design details

Specifications

Details

Specifications

Details

Usage & care

How to use

How to repair or replace

key 'ProductAssurance.warranty (en-IE)' returned an object instead of string.

Care instructions

Specifications

Details

How to use

How to repair or replace

key 'ProductAssurance.warranty (en-IE)' returned an object instead of string.

Care instructions