Filters 0
Filters 0
FORCLAZ

€0.00
Tax included
de_modelcolor:
  • BORDEAUX
  • GREY
  • BLACK
Not available online
A waterproof, warm and durable jacket. Thanks to its 3-in-1 capabilities, it provides rain protection and warmth in accordance with the weather conditions.

BENEFITS

Anatomic design

Fitted at the waist with press studs, and a Velcro tightening at the cuffs

Flexibility

3-in-1: It adapts to every season thanks to the removable fleece.

Durability

Polyamide fabric is extremely resistant to abrasion and chaffing from the bag

Warmth

Comfortable down to 0°C. Removable fleece lining

Weight

This jacket weighs approximately 1.12 kg in size M

Waterproof

5000 mm H2O coating (Schmerbers). 2-hour shower. Fully taped seams.

Pockets

2 hand pockets with zip and 1 chest pocket on the jacket and on the fleece

TECHNICAL INFORMATIONS

3-in-1 to adapt to every situation

With the "3-in-1" system, the jacket is perfect for cold conditions (down to 0°C). For travelling in warm weather, you can leave the inner layer at home and just take the rain jacket. You can also wear the fleece by itself like a mid-layer over a T-shirt.

How is the thermal insulation of my jacket tested?

The jacket has undergone a thermal resistance test that measures the quantity of warmth lost between the body and outside environment. The lower this temperature, the more the product preserves body heat and therefore protects it from the cold outside. We placed the jacket on thermal mannequins that reproduce the heat emitted by the body and sweating. They are placed in temperature controlled rooms that go down to -40°C.

At which temperature will I be protected?

The Travel 100 jacket has been certified for temperatures down to 0°C. This means that it provides thermal comfort down to that temperature, if you wear the fleece with the waterproof jacket.

How is the waterproofing of a jacket measured?

The test is carried out in 3 stages:



- First, we check the quality of the waterproofing tape on the entire jacket.

- Then, the jacket is put under an artificial shower with a flow rate of 100 L/h for 3 hours.

- Under the jacket, the mannequin is wearing an absorbent fabric that darkens to indicate any moisture, in order to check the waterproofing of the product.

Which size should I choose?

This jacket was designed to be worn over a second layer garment (fleece, sweater).

Select your usual size for the best fit.

The jacket has a longline cut that stops at the middle of the buttocks.

You can tighten the waist thanks to the snap fasteners.



Adjust the hood using the drawcord around the face. Its depth is adjusted by a rip tab at the back of the head.

COMPONENT WATERPROOFING OF THIS JACKET

The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.

WATERPROOFNESS OF THIS JACKET

The waterproofness of a jacket isn’t limited to just its components: the assembly technique of the different parts is also an evaluation criterion.



Whether heat-sealed or sewn then waterproofed, the overall waterproofness of your jacket is measured using a shower test developed by Decathlon, which simulates rain of different intensities.



As such, the TRAVEL 100 waterproof jacket protects you from a downpour, i.e. 12 cm of rain in 2 hours.

Tips for storage and maintenance

ANY TYPE OF IRONING ALLOWED. ANY TYPE OF IRONING ALLOWED.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT. MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C. IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT. MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C. IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.

TESTS AND WARRANTY

Warranty

2 Years