"Coated" jacket: what are the advantages of this coating?
A breathable coating is a coating applied to a fabric in the form of a paste or liquid which creates a protective film. The breathable coating is a waterproof barrier that lets through water vapour produced by the body when snowboarding.
How to wash my jacket?
To optimise your jacket’s performance and durability, we advise the following: * Machine wash at 30°, synthetic programme.
* Turn the product inside out.
* Add a small amount of detergent. No softener.
* We recommend you wring it by hand.
* Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.You can restore the water resistance of the outer fabric using a fabric waterproofing spray. Read the care label.
Why is the waterproofing value online and the one in the jacket different?
We designed our jacket by choosing a technical coating that ensures waterproofness of 10,000 mm when you buy them. After each wash the coating becomes less efficient, which is why we also test the product to guarantee optimal waterproofing even after 5 washes. It’s this value after 5 washes that is printed inside the jacket so that the information remains true even in a few years when you sell your product.
To help you choose the right size
Grey Jacket:
The model on the photo is wearing a size L and measures 181 cm.
Measurements:
Chest measurement: 96 cm
Waist measurement: 83 cm
Arm length: 61 cm
Yellow Jacket:
The model on the photo is wearing a size L and measures 180 cm.
Measurements:
Waist size: 99 cm
Arm length: 51 cm
How can I be sure of the strength and durability of my jacket?
Our snowboard jackets are guaranteed for 5 years. We offer repairs locally if your jacket is damaged. Contact us on our website to find out more about how to get your product repaired.
We take particular care in choosing all the elements and assembly processes that make up our ski and snowboard jackets so they are as durable as possible.
This product is repairable
For the two years of guarantee, if your product can be repaired, the repairs (hooks, seams, zips, etc.) are carried out free of charge. Beyond this period, they can still be carried out for a fee, locally at your nearest store.
Can I be sure my jacket will give me proper protection in bad weather?
To withstand bad weather (rain, snow, wind, etc.), the jacket has been developed with a component and assembly that keep the water out and reduce wind chill. The waterproof rating is measured by placing the product in a special shower that replicates the real-life conditions encountered by snowboarders during use. Finally, we have spent a few days snowboarding, in all conditions, to validate the waterproofing of the product.
What is the water repellent feature of my jacket for?
The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using the products available in our stores. All the waterproof jackets that we design for snowboarders are water-repellent.
How will my jacket keep me warm?
To keep you warm, we use wadding insulation. Wadding is a synthetic component made from polyester which stores more or less air, depending on the length of the fibres. Wadding can be standard, hi-tech or silicone-coated, each with different properties (warmth, low weight, elasticity, etc.)
Water often gets in through the seams. Does my jacket have taped seams?
In addition to the waterproof fabric, we reinforce the waterproofing of the jacket with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight.
On this product, these waterproof seams are used in the areas the most exposed to the snow (hoods, shoulders).
How should I dress to avoid getting cold in the mountains?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule: - Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.
