12 V/15 A electric pump for inflatable SUP and kayaks
Store Availability
Store Availability
BENEFITS
Ease of use
Set the pressure, start the pump.
Lightweight
Weight: 1.2 kg.
Power
Inflates a 300 L SUP to 15 PSI in approximately 12 minutes.
Flexibility
Has 1 Boston fitting, 1 mini-Boston fitting and 1 high-pressure fitting.
Parameter measurement
Built-in 0-15 psi pressure gauge.
TECHNICAL INFORMATIONS
Connection
Works plugged into a 12V cigarette lighter socket.
WARNING: The car battery must provide at minimum 15A.
Provides pressure of up to 15 PSI (1 bar).
Enables you to inflate low-pressure kayaks (1 to 2 PSI) and stand-up paddle boards (10 to 15 PSI).
Operation
1/ Connect the pump to the cigar lighter with the car engine running.
2/ Connect the pump hose to the SUP
3/ Select the psi/bar/hpa mode with the arrow button
3/ Pre-set the recommended pressure with the +/- buttons
4/ Start Press ON to inflate.
The pump stops at the set pressure.
SAFETY CONTROL
Make sure that the cigarette lighter plug is fully pushed in to avoid overheating caused by bad electrical contact.
composition
composition
Motor: 100.0% Stainless Steel; Cable: 100.0% 1.2-Benzisothiazole-3(2H)-One; Main part: 100.0% PCBA
Tips for storage and maintenance
Storage tips
Store in a dry place. Avoid dust and sand.
Restrictions on use
Inflate to the pressure recommended by the manufacturer.
TESTS AND WARRANTY
Warranty
2 Years
Parts guarantee
Warranty: 2 years