Easy stand-up paddle and kayak dual-action high-pressure easy pump 0-20 PSI
Our team has refined the diameter of the piston to reduce the force needed for inflation. 15 psi with this pump is equivalent to 11 psi with a classic pump.
The double-action high-pressure pump is designed to easily inflate SUPs or kayaks to pressures of up to 20 PSI. DEFLATE mode can also be used to optimise the storage of the inflatable
BENEFITS
Compact design
Clip-on hose for easy transport and storage.
Ease of use
2 MODES mode 1: inflation (0-8 PSI) mode 2: pressurisation (8-20 PSI)
Versatility
Can be used to inflate and deflate your inflatable
Ergonomic grip
Wide feet for maximum stability. Ergonomic handles for comfort.
Robustness
Heavy-duty hose with rotating head to prevent disconnecting during inflation.
Parameter measurement
Built-in 3-20 psi pressure gauge. Accurate from 3 PSI.
Repair
The hose, pressure gauge, handle and aluminium tube are available as spare parts
TECHNICAL INFORMATIONS
Directions for use
1/ Stand on level and solid ground
2/ Check that the hose is attached on the INFLATE side
3/ Connect the hose to the inflatable
4/ Turn the orange ring to position 1
5/ Inflate the craft until it becomes difficult (approx. 8 PSI)
6/ Turn the orange ring to position 2
7/ Finish inflating to the recommended pressure.
Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT / black: other)
Technical dimensions
Height: 60 cm
Width: 27 cm
Depth: 12 cm
Hose length: 100 cm
60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone.
Pump weight: 1.2 kg
Volume of air transferred:
Mode 1: 2.1 litres
Mode 2: 1.2 litres
Repair
We design our products so that they are as repairable as possible. The following spare parts are available for this pump:
Handle + Pressure gauge: 8810939
Aluminium tube: 8810947
Hose: 8810949
Sold with a set of adapters
In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with:
A "Mini Boston" adapter to inflate the kayak seats
a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents.
An adapter and end piece to inflate certain kitesurfing wings.
Storage instructions
Use the 2 fastening clips to attach the hose and pump together.
Do not stand on the pump or the hose.
Clean off any sand, it can damage the seals.
composition
composition
Main part: 30.0% Ethylene Vinyl Acetate, 70.0% Polyethylene
Tips for storage and maintenance
Storage tips
Attach the hose to the clips provided for this purpose for compact storage.
Restrictions on use
Follow the inflation instructions
TESTS AND WARRANTY
Parts guarantee
Availability of spares that are essential to using the product: 10 years Warranty: 2 years