WEDZE
Ref.
8590074
4056687
WARM AND WATERPROOF BABY SKI SUIT 900 WARM PNF LUGIKLIP - TURQUOISE
€65.00
Tax included
Store Availability
Store Availability
We are specialists in babies' snow equipment and designed this ski suit that combines the best possible waterproofing and warmth.
BENEFITS
Compatibility
Lugiklip system to attach Wedze baby mittens. Mittens not included.
Easy dressing
Wide zip-up openings. Put the elastic of the gaiter over the boot.
Customisation
Space inside for writing your kid’s name.
Abrasion resistance
Reinforced ankles and bottom to withstand sliding on the snow.
Flexibility
High collar covering back of neck Can be converted into hood with good coverage
Adjustable
Adjustable leg and arm length thanks to the PULL'N FIT system.
Warmth
200g/sqm wadding200g/sqm fleece lining, 220g/sqm sherpa fleece middle back.
Waterproof
Waterproof coating 5000mm H2O (Schmerbers) | fully taped seams.TECHNICAL INFORMATIONS
How can I be sure that my baby will be warm when sledging in the snow?
Our designers use wadding and a special lining to keep the body warm. These polyester-based synthetic components trap more or less air depending on their thickness. The thicker the component (wadding or lining), the more air it contains and the warmer it is. This snowsuit keeps in the warmth during winter outings.
How is the waterproof rating of the baby ski suit verified?
The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.
This jacket is designed with a waterproof coating (JIS 1092 standard): this component resists 5,000 mm H20 (Schmerbers) before washing (equivalent to the pressure exerted by a 5 metre column of water).
This jacket is designed with a waterproof coating (JIS 1092 standard): this component resists 5,000 mm H20 (Schmerbers) before washing (equivalent to the pressure exerted by a 5 metre column of water).
How is the waterproof rating of the baby ski suit verified?
This waterproof snowsuit has been validated in a shower test under 60 litres of water / sqm / hour for 4 hours. This test reproduces the average conditions of a snow storm.
What is PULL'N FIT?
The innovative PULL'N FIT technology makes it easy to adjust the leg and sleeve length on your baby's snowsuit. With PULL'N FIT, the baby ski suit grows with your baby across 2 sizes.
How do I make sure my baby doesn't lose their mittens and they always have warm, dry hands?
Use the Lugiklip system to attach Wedze baby mittens onto the sleeves of their Wedze baby ski suit and jacket.
In their quest for independence, your kid can attach the mittens on the sleeves on their own without going wrong thanks to the fun design of the Lugiklip accessories! Just combine the colours and animal heads will take shape.
The mittens will always be to hand, and the right hand!
The mittens are not included when buying the baby ski suit
In their quest for independence, your kid can attach the mittens on the sleeves on their own without going wrong thanks to the fun design of the Lugiklip accessories! Just combine the colours and animal heads will take shape.
The mittens will always be to hand, and the right hand!
The mittens are not included when buying the baby ski suit
How can I stop snow from getting in my après-ski?
Put the elastic at the bottom of the baby ski suit over the boot to prevent snow and draughts from getting inside the snow boot.
How do you dress your little ones so they stay warm when you're out sledging?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or protective layer, to protect against bad weather (like this babies' ski suit).
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or protective layer, to protect against bad weather (like this babies' ski suit).
Where can I write my baby's name on this ski/sledge snowsuit?
Space to write your kid’s name in order to personalise the product. A very practical feature for finding their snowsuit at the crèche or nursery this winter.
composition
composition
Padding: 100.0% Polyester; Main fabric - Outer layer: 100.0% Polyester; Main fabric: 100.0% Polyamide; Main lining: 100.0% Polyester; Lining: 100.0% Polyamide; Coating: 100.0% Polyurethane
Tips for storage and maintenance
ANY TYPE OF IRONING ALLOWED.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
DO NOT TUMBLE DRY.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Store on a hanger and do not fold as this could damage the fabric membrane. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All the sledging products are tested under the real-life conditions for which they are designed: snow, cold and all the conditions you're likely to encounter when sledging. The design teams, product leaders, engineers and pattern makers ensure that the programme for which the product has been designed and developed corresponds perfectly to its use in the field.
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 73% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
Material
Recycled polyamide
Product made from 3% recycled polyamide
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 30%.