ROCKRIDER
Ref.
8618975
4239624
Mountain Bike Mudguard Frame Protection 26"-27.5"-29" - Black
€10.00
Tax included
Store Availability
Store Availability
This 26" to 29" mudguard is designed for protecting your torso and face from mud splatter and the frame from rocks when downhill mountain biking
BENEFITS
Compatibility
For all MTBs not equipped with welded cable stops under the frame
Easy assembly / dismantling
Easy to attach/remove with the 2 straps or screws on the bike
Non-messy
It effectively protects your upper body and face from muddy splashes
Weight
Weight: 112 g
Robustness
It protects the underside of the bike's frame from rocksTECHNICAL INFORMATIONS
LEVEL OF PROTECTION
This mudguard withstands impacts and protects mountain bikers' chests and faces from mud spray.
For this purpose, place the blade as high as possible under the frame.
You can never totally escape mud when riding in wet conditions...
But a mudguard mounted on the fork is very effective.
For functional purposes, if your bike frame and tyre width permit it, opt for a hybrid bike mudguard (with a longer blade that is closer to the tyre).
For this purpose, place the blade as high as possible under the frame.
You can never totally escape mud when riding in wet conditions...
But a mudguard mounted on the fork is very effective.
For functional purposes, if your bike frame and tyre width permit it, opt for a hybrid bike mudguard (with a longer blade that is closer to the tyre).
Bike compatibility
This mudguard fits MTBs without welded cable stops underneath the frame
BOX CONTENTS
The mudguard's blade comes with 2 adjustable rip-tab straps
Assembly
Be sure to check the mounting orientation (wider part of the blade down).
If screws are already present under the frame (frame protection or cable housing), use them to mount the mudguard instead of the straps.
The screws may be too short. If so, you will need to buy longer ones: M5 L20 countersunk screws.
If there is an external battery on the frame, remove it, attach the mudguard with rip-tab straps and then put it on top.
If screws are already present under the frame (frame protection or cable housing), use them to mount the mudguard instead of the straps.
The screws may be too short. If so, you will need to buy longer ones: M5 L20 countersunk screws.
If there is an external battery on the frame, remove it, attach the mudguard with rip-tab straps and then put it on top.
Dimensions and weight
Blade length: 345 mm
Smaller blade width (on top): 100 mm
Wider blade width (on bottom): 120 mm
Total weight: 112 g
composition
composition
Main part: 100.0% Polypropylene; Strap: 100.0% Polyamide
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Restrictions on use
Not compatible with MTBs with welded cable stops
TESTS AND WARRANTY
Test product
Our team of product designers based at the B'Twin Village in Lille is continuously working to make cycling more comfortable for our users.
Our obsession is to create products that meet the specific cycling needs of our users and ensure everyone has a good cycling experience.
Warranty
2 Years