QUECHUA
Ref.
8841731
5006300
Mattress repair kit (patch and glue)
€8.00
Tax included
Store Availability
Store Availability
With this glue and these patches you can repair your inflatable camping mattress in the event of a puncture, small tear or leak
BENEFITS
Compatibility
Suitable for all inflatable camping and trekking mats.Versatility
Repair holes & tears up to 1 cm wide on any surfaceDurability
Adhesive patches to stick on a deflated mattress (7x3 cm) Can also be gluedTECHNICAL INFORMATIONS
Compatibility
Suitable for all camping air mattresses, inflatable trekking mats, 10 L solar shower
(8513633), 10L jerrycan (8513669) and water bags.
(8513633), 10L jerrycan (8513669) and water bags.
How to identify the leak
To identify the leak, spray it with soapy water; bubbles will appear around the leak.
Once identified, clean and dry the area with a clean cloth.
You can circle the leak with a pen so you don't lose sight of it.
Once identified, clean and dry the area with a clean cloth.
You can circle the leak with a pen so you don't lose sight of it.
How to use this kit
Only use the sandpaper on flocked surfaces until the "felt" is removed to achieve a smooth surface. Do not use sandpaper on other types of surfaces.
On a smooth surface, you can use the patch on its own
On a more "complex" area (weld, corner, seam), a trekking mat or a self-inflating one, use the glue and the patch
Let the glue dry for 4 hours before applying the patch. Once the patch has been applied, you can reinflate the mattress immediately
On a smooth surface, you can use the patch on its own
On a more "complex" area (weld, corner, seam), a trekking mat or a self-inflating one, use the glue and the patch
Let the glue dry for 4 hours before applying the patch. Once the patch has been applied, you can reinflate the mattress immediately
How to extend the life of the glue
You can store it in a cool, dry place, or even in the fridge for optimal preservation.
composition
composition
Glue: 50.0% Polyurethane, 50.0% Water; Top sheet: 100.0% Cellulose; Pad: 100.0% Bromo Isobutylene Isoprene Rubber
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years