First, remove the wheel and deflate the tyre.Push the sides of the tyre to detach them from the rim.Use DECATHLON tyre levers (ref.8930710). 8930710). Insert one under the tyre to lever it out.Attach it to a spoke and repeat the operation to release one complete side of the tyre.
To check the wear on your tyres, inspect the tread.A tyre should be replaced if you can see the protective strip (or underlay) or if the tread pattern has worn away.If either of these signs is visible, we recommend replacing the tyre.
How to mount your mountain bike tyre
First of all, install the tubeless valve (Ref. 8817242). Fit the tyre one side at a time, starting at the valve.Once the tyre is in place, inflate it until you hear a 'pop'.Deflate the tyre by pressing on the valve cap.Remove the valve cap, then insert the preventive liquid (Ref.8814747) through the valve.Replace the valve cap, re-inflate, then spin the wheel to distribute the liquid evenly.
How to inflate your tyre correctly
Before starting to inflate, make sure the tyre is correctly positioned on the rim.Then check the values marked on the sidewall.Adjust the pressure according to these recommendations for accurate inflation.
Pro tip:
Optimise your performance by adjusting your tyre pressure to the terrain.For better grip and control on technical terrain, opt for low pressure.If your goal is efficiency, choose high pressure.
Specifications
Details
wheel size
26"
tyre beads
stiff
tyre assembly
inner tube
etrto
52-559
type of tyre
all terrain
condition
new
tyre compound type
mono compound
e-bike ready
no e-bike ready
tyre width x wheel size
26*2
width (in mm)
51 mm
Usage & care
Specifications
Details
wheel size
26"
tyre beads
stiff
tyre assembly
inner tube
etrto
52-559
type of tyre
all terrain
condition
new
tyre compound type
mono compound
e-bike ready
no e-bike ready
tyre width x wheel size
26*2
width (in mm)
51 mm
How to use
How to repair or replace
key 'ProductAssurance.warranty (en-IE)' returned an object instead of string.
