Marketplace -Online Only

Multifunction mount for bike computer, camera and light

Centralise your bike computer, camera and light on a single compact mount – reinforced aluminium alloy, 6 mm thick, approx. 75 g, compatible with Garmin, XOSS, Magene, iGPSPORT and more.

Sold and shipped by Sportenzia

How to get it

Description

CYCLAMI Multifunction Mount for Bike Computer, Camera and Light

Optimise your cockpit with this CYCLAMI multifunction mount, designed for integrated handlebars and compatible stems with two front mounting points. Made from a reinforced aluminium alloy 6 mm thick, it positions your bike computer at the centre of the cockpit while offering a lower fixing point for an action camera, a light or any other compatible accessory. Compact and robust, it is compatible with a wide range of Garmin, XOSS, Magene, iGPSPORT, Navihood and Black Bird computers.

Technical Specifications

Material: aluminium alloy
Colour: black
Dimensions: 112 × 52 × 26 mm
Weight: approx. 75 g
Mount thickness: 6 mm
Required bolt hole spacing: less than 4.5 cm
Compatible bolts: M5 (not compatible with M6)
Maximum torque: 6 N·m

Key Features

Multifunction mount: combines a bike computer and a compatible accessory on a single support.
Central position: the computer is placed along the centreline of the cockpit for a straightforward reading of data during the ride.
Lower fixing point: allows the installation of a 360° sports camera, an action camera or a compatible front light beneath the computer.
Reinforced aluminium alloy: 6 mm thick metal structure designed to combine rigidity, resistance and low weight.
Compact format: at 112 × 52 × 26 mm, the mount integrates discreetly in front of the handlebar.
Low weight: approximately 75 g.
Quick-release computer system: makes installation and removal of the GPS straightforward depending on the model used.

Computer Compatibility

The mount is designed to be used with a variety of compatible bike computers, including:

Garmin
XOSS
Magene
iGPSPORT
Navihood
Black Bird

Important: check the fixing type of your computer before purchasing to ensure it matches the interface supplied with the mount.

Handlebar Compatibility

This model is intended for integrated handlebars and stems with two front compatible fixing points. Before ordering, it is essential to check the dimensions and bolts of your cockpit.

The centre-to-centre distance between the two fixing holes must be less than 4.5 cm.
Compatible with M5 bolts.
Not compatible with M6 bolts.
Recommended maximum tightening torque: 6 N·m.
Always follow the tightening torque specified by the manufacturer of your handlebar or stem.

Lower Mount for Camera and Light

The lower section of the mount allows additional equipment to be attached beneath the computer. This configuration is particularly practical for keeping a clean and centred cockpit without multiplying fixings on the handlebar.

Compatible sports or 360° camera
Action camera with a suitable fixing system
Compatible front light
Other accessories using a corresponding mounting interface

Installation

Check that the bolt hole spacing of your handlebar or stem is less than 4.5 cm.
Check that your setup uses M5 bolts and not M6 bolts.
Position the spacers and the mount at the designated fixing points.
Insert the supplied fixing bolts and gradually tighten the mount.
Do not exceed 6 N·m and observe the maximum torque specified by the handlebar manufacturer.
Then install your computer on the upper section and, if required, your camera or light on the lower fixing point.
Before each ride, check the tightness of the mount and the locking of all accessories.

Advantages

Groups several devices on a single mount
Centred position for the computer and accessories
Compatible with many bike computer brands
Possibility of simultaneously mounting a computer and a camera or light
Construction in reinforced aluminium alloy
6 mm thickness
Compact with only 112 mm in length
Weight of approximately 75 g
Suitable for integrated handlebars and stems with compatible fixings

Package Contents

1 × CYCLAMI multifunction mount for bike computer
2 × Handlebar fixing bolts
2 × Spacers
3 × Washers
1 × Riser bolt
2 × Hex keys

Note: the camera, GPS computer, light and handlebar that may appear in the product images are shown solely to illustrate installation possibilities and are not included with the mount.

Multifunction mount for bike computer, camera and light

How to get it

Description

Specifications

Details

European Article Number

Brand

EU product safety contact

Description

Specifications

Details

European Article Number

Brand

EU product safety contact

Specifications

Details

European Article Number

Brand

EU product safety contact

Specifications

Details

European Article Number

Brand

EU product safety contact