Shock-absorption hiking pole, MT500 shockproof

Name: 1 Impact-Absorbing Hiking Pole MT500 Anti-shock - Red
Availability: InStock

How about hiking in silence? This innovative new tip, made using flexible materials, is designed to reduce repeated impacts.

ID 8580850

Sold and shipped by

How to get it

ergonomic grip
Dense foam grip, long 3D design. Comfortable knob. Soft wrist-strap
adjustable
External lock & automatic push-pin. Precise & fast adjustment. From 105 to 130cm
compact design
3 telescopic sections. Collapsed length: 58 cm. Collapsed width: ~5cm.
cushioning
Tip designed to push into the pole to reduce the transferred impact
robustness
Aluminium 7075-T6 /6061-T6. Tube diameters 18/16/14mm. Tungsten tip
compatibility
Summer basket supplied. Accessories and A-S parts available separately.
weight
245 g / pole

Description

Design details

What's the difference between these poles and poles without an anti-shock system?
Its soft materials are also designed to reduce noise from impact. This pole is measured as being two times less noisy than a pole without an anti-shock tip (MT500).
Is this pole really quiet?
The tip absorbs some of the impact by sliding into the body of the pole over approximately 1 cm. We have used silicone foam, a material that is particularly resistant to deformation and external impacts, which is designed to get crushed with impact and then return to its original shape.
How to adjust your poles to the correct length?
Hold the poles with your arms bent at a right angle. To do this: - Pull the lower part all the way out until the automatic push-pin (metal button) locks - Open the lever of the external lock mechanism - Slide the tube to the desired length - Close the lever -Never go beyond the STOP line to avoid the risk of breaking the pole.
How do I use these hiking poles?
These hiking poles are designed to help you balance, propel yourself and to ensure both your arms and legs are working. To be on the safe side, check that your poles are locked in place before you set off by putting a lot of your weight onto the poles. Do not attach to your backpack in stormy weather.
How do I look after these hiking poles?
After use, if water has got into the pole, take the parts apart and allow to dry. Clean any dust and mud with or without water using a soft brush or paintbrush. Once dry, you can reassemble the strands. We recommend that you do not try to oil or grease them.
Why are poles sold individually?
Poles are sold individually for two main reasons. Firstly because some people wish to use only one pole. Also, if one of your poles breaks, this means you only have to buy one and not a complete pair.
What accessories are compatible with these poles?
Hiking pole caps: ref. 8580865 Summer baskets : ref. 8737774 Winter baskets: ref. 8503857 Replacement tip: ref. 8755646 Replacement stopper: ref. 8642202 Lower section MT500 AS: ref. 8642204

Get the bundle

Shock-absorption hiking pole, MT500 shockproof

€26.00€26.00/unit

2 colours

set of 2 hiking pole caps

€4.00€2.00/unit

Shock-absorption hiking pole, MT500 shockproof

How to get it

Features

ergonomic grip

adjustable

compact design

cushioning

robustness

compatibility

weight

Description

Design details

Specifications

Details

Composition

EU product safety contact

Usage & care

Get the bundle

Description

Design details

Specifications

Details

Composition

EU product safety contact

Specifications

Details

Composition

EU product safety contact

Usage & care

How to use

How to repair or replace

2-year warranty

Care instructions

Storage

Specifications

Details

Composition

EU product safety contact

How to use

How to repair or replace

2-year warranty

Care instructions

Storage

Get the bundle