Go to search
Go to content
Go to footer

SQUIRT SPECIAL E-BIKE CHAIN LUBRICANT 120ML

The best wax-based bike chain lubricant for use on all types of electric bike chains

ID 8970699

Sold and shipped by

How to get it

ease of use
Easy to apply to your chain links using this bottle.
long-lasting effect
One application can last up to 500 km on roads and 200 km mountain biking.
versatility
Long-lasting dry wax-based lubricant for all types of chain.
smooth pedalling
Reduces the chain jumps and improves gear changes

Description

Design details

Easy to apply:
Wipe the chain with a dry cloth after your ride, give it a squirt and your bike will be ready for your next outing.No more degreasing, no more sludge.
Economical:
With Squirt, there's almost no need to buy degreaser.Chains last up to twice as long.And above all, you save loads of time on maintenance.And time is money.
Save watts:
Squirt has one of the best performances of all lubricants on the market.You'll go faster and further, with less effort.
Long-lasting:
One application of Squirt can last up to 500 km on roads and 200 km mountain biking.Set off with peace of mind: your drive train will work silently throughout your ride.
Special e-bike:
If you cycling is straining your thighs too much, or you're riding an e-bike, we recommend you grab our new 'special e-Bike' Squirt developed for high mechanical pressure from the motor.
How do you apply this lubricant?
First use: 1. Completely remove the factory grease and the other lubricants on your chain using a degreaser.2. Rinse your chain with clean water and dry it.3. Follow the application instructions below and repeat after 5 minutes.Application instructions: 1. Shake the bottle and apply inside the chain while turning the cranks.2. Do not wipe.3. Dry the chain completely before you cycle – Do not degrease again.
How often do you apply this lubricant?
It depends on the riding conditions.In general, when you start hearing a dry chain sound, a new application is already due.In wet and muddy conditions, it will not last as long as in dry and dust-free conditions.Generally, from 30 to 300 miles the chain will remain clean with one application.If you plan to ride in wet conditions, lubricate your chain if possible.
Do I have to degrease my chain before starting to use SQUIRT 'Special Low temperatures' for the first time?
Yes.All Squirt Chain lubricants and the chain wax should be started on a clean chain that's been properly degreased and is dry.The factory grease on a new chain must be removed with an organic solvent if necessary.A second application five minutes after the first is recommended to start with Squirt.
How often should I degrease my chain when I use this lubricant?
Degreaser is not necessary when you use Squirt Special E-Bike.It doesn't form a black build-up like oils that trap dirt and accelerate chain wear.It doesn't stain and stays dry.Brush with a dry brush if necessary and remove the occasional build-up from the rear derailleur pulleys with a toothbrush.
Why does it work?
The requirements of an electric bike are greater than for ordinary bikes.With the constant change in pace, a continuous application of greater rotational force and a higher total average mass, chains can become worn more quickly than on ordinary bikes.Squirt E-Bike lubricant contains the same basic formula as Squirt Chain Lube with high-pressure lubricants added to limit the disproportionate wear of the chain.
Useful to know:
The formula has a layering effect that requires a few applications to work completely into the chain.Only degrease if necessary.