Camping tent - MH100 XXL - 4 person
Store Availability
Store Availability
BENEFITS
Easy assembly / dismantling
Simple pitching thanks to coloured markers on the poles
Easy transport
Cylindrical cover | 57 x 23 cm | 30 litres | 6.7 kg
Capacity
Bedroom: 240 x 210 cm | Seated living room: 3.9 sqm
Waterproof
Tropical rain laboratory test | Under shower: 200 L of water per hour per sqm
Heat reduction
Flysheet above the living area to reduce condensation
Darkness
UPF 30 fabric: lets in daylight and filters out some UV rays
Wind resistance
Withstands force 6 winds - around 50 km/h | Wind tunnel test
TECHNICAL INFORMATIONS
Living Room and Bedroom
Living room of 3.9 sqm with a tent height of 1.40 m.
The bedroom of this tent is designed to accommodate a maximum of four 60cm-wide mattresses. It can also accommodate a couple looking for a very large bedroom.
Pitching and dismantling
There are three poles to insert into their corresponding sleeves. There are colour codes to help you.
We recommend that 2 people pitch the tent.
Sun protection
The flysheet fabric has UPF 30 sun protection.
Caution: be careful, as a large amount of UV rays can get in through a simple open door.
Ventilation
The ventilated flysheet on the living area airs the room and reduces condensation inside your tent. High ventilation hatches are also provided at the front and back of the tent, along with high mosquito nets on the door and at the back of the bedroom.
Wind resistance
We test all our tents in a wind tunnel on a turntable. The aim is to expose each side of our tent to the same wind intensity.
Properly pitched, with the guy ropes deployed, this tent remains habitable in wind speed 6, measured at 50 km/h.
Waterproofing
We test our tents to validate their waterproofing. The first test is done in the laboratory, 4 hours under 200 litres of water per hour per sqm, the equivalent of tropical rain of 200 mm per hour. The second test is done in the field under real-life conditions by our teams. This tent is fitted with a polyurethane-coated polyester flysheet measuring 2,000 mm. It also has seams that have been waterproofed with heat-sealed strips, and a 140 g/sqm polyethylene groundsheet.
Repair
As designers and users who love nature, we care about the durability of our products. That's why all our tents are designed to be repairable. Spare parts and pole repairs are available at the workshop of your Decathlon store or on our website.
Poles and tent pegs
Poles - All our poles are made from fibreglass and undergo double quality checks. This guarantees some of the best resistance against breakage.
Tent pegs - All our pegs are made of steel and have a diameter of 6 mm.
Maintenance advice
Our camping tents have been designed for occasional outdoor use (4 weeks per year) when camping or in the great outdoors. Continued exposure to UV rays over several weeks can damage the fabric. These products are not classified as “garden furniture” and aren’t designed to be left outdoors permanently. To guarantee maximum durability of your tent, it's important to store it when not in use.
composition
composition
Double roof: 100.0% Polyester; Inner fabric: 100.0% Polyester; Pole: 100.0% Glass Fiber
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We advise that you air-dry your tent outside, including the underside. You can then store it without any risk of odours or mould developing.
Restrictions on use
Not suitable for permanent outdoor exposure.
TESTS AND WARRANTY
Test product
Our partner laboratories, as well as our own, contribute to the innovation and development of our Quechua tents. Extensive analysis and experience allow us to guarantee the technical nature of these products (wind resistance, waterproofing, durability).
Warranty
3 Years
Agree by
To meet your requirements, Quechua tents are tested in the conditions that you may encounter during your nights in camping or in the wilderness. Our teams, plus a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market. This allows us to guarantee a high-quality tent.
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
ProcessBiton
Product made from 20% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 39% compared to conventional dyeing.
-
ProcessGreige
Product made from 24% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.
-
ProcessDope dyed
Product made from 48% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.