Women's City Bike Waterproof Trench Coat with Hood - Terra Cotta
Store Availability
Store Availability
BENEFITS
Water repellent
Special treatment that makes water slide off the fabric's surface.
Visibility
Be seen at night from 50 m away and 360° thanks to the reflective bands.
Adjustable
Position the hood on or under your helmet for optimal protection
Windproof
Protect yourself from the wind thanks to the coated fabric
Waterproof
The fabric withstands 15,000 mmH2O before washing and 5,000 mmH2O after washing.
Pockets
Ride with peace of mind with your 2 side zip pockets
Ventilation
Stay nicely ventilated thanks to the large, zipped openings under the arms.
Instructions
DownloadTECHNICAL INFORMATIONS
WHICH SIZE?
Our model is 1.73 m tall and is wearing a size S.
Click on our sizing guide at the top of the page.
WATERPROOFING IS:
- A WATER-REPELLENT TREATMENT
A fluorine-free chemical recipe placed on the fabric's surface to make water slide off it. This treatment can be reactivated by heat (10 minutes in the tumble drier on a gentle cycle).
- A WATERPROOF CONSTRUCTION
The aim is to avoid water getting in through the holes in the seams by placing a waterproof strip under the seams.
- A WATERPROOF FABRIC
A fabric's capacity to prevent water from penetrating it.
MEASURING WATERPROOFING
Waterproofing is measured in Schmerbers or mmH2O (the pressure exerted by a water column).
A material with a rating of 10,000 mmH2O can resist 10 metres of water.
The bigger the number, the more waterproof the fabric.
NIGHT-TIME VISIBILITY
This trench coat is certified as PPE under standard NF EN17353. Cyclists can ride safely at night thanks to the certified reflective bands around the arms and torso.
The reflective parts have been positioned based on the constraints of cycling (leaning forwards, wearing a backpack, signalling with your arm, etc.) to guarantee 360° visibility at night from up to 50 m away when picked up by car headlights.
CYCLING-SPECIFIC CUT
The 940 women's trench coat is designed to protect urban cyclists in rainy weather. Its cycling-specific, fitted cut provides good freedom of movement and covers the lower back, arms, neck and wrists when in riding position to guarantee great protection from the cold and wind.
Zipped vents under the arms to let air circulate freely.
You can wear your helmet over or under the hood (except MTB helmets).
FABRIC BREATHABILITY
Hydrophilic coating (RET = 12): helps the garment to wick perspiration away. To see if a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more the fabric lets water vapour produced by the body escape, and the more breathable it is.
composition
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Membrane: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store your parka on a hanger and don't squash it as this will damage the quality of the reflective strips.
Restrictions on use
You will not be visible at night without a light source.
TESTS AND WARRANTY
Test product
We perform 3 tests on our waterproof products: - Waterproof fabric: We use Japanese standard JIS 1092. - Water-repellent treatment: According to ISO 4920 before and after washing, to guarantee the durability of the water-repellent treatment. The water repellency is scored on a scale of 0 to 5 (5 being the best performance). - Waterproof assembly: We follow specific design rules and use a shower test that simulates different intensities of rainfall to check our compliance with these rules.
Warranty
2 Years
Agree by
This parka is an item of personal protective equipment (PPE) that makes the wearer more visible. It has been tested for compliance with CE standards by a notified body: SGS Fimko, no. 0598, Takomotie 8, 00380 Helsinki, Finland. The CE test was performed on the basis of the requirements of standard NF EN17353 for category 2 PPE.
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 71% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessGreige
Product made from 1% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.