ROCKRIDER
Ref.
8668176
4420742
All-Mountain MTB Waterproof Jacket - Grey
€95.00
Tax included
Store Availability
Store Availability
This rain jacket is designed for your All Mountain / Enduro rides in rainy weather.
BENEFITS
Compact design
The jacket folds down into its inside pocket so you can take it anywhere.Abrasion resistance
Brush up to! The tightly woven fabric withstands abrasion.Flexibility
Hood adjusts to fit your helmet. Asymmetric zip and long sleevesWeight
380 g in size L.Waterproof
It has it all: material (10 000 mm), taped seams, water repellent zipPockets
One waterproof zip-up pocket on the chest, with a phone- and key-holder.Breathability
3-layer fabric with breathable membrane;RET = 6Ventilation
Openings at the back and on the sides for ventilationTECHNICAL INFORMATIONS
SIZING INFORMATION
Our model is wearing a size M top and size M bottoms.He is 1.74 meters tall.
RESISTANT TO RUBBING
fabric with a tight weave.The result? An authentic rainproof mountain biking jacket that can deal with all sorts of rubbing during your MTB outings (hydration pack straps, branches, etc.)
What is a waterproof fabric?
Waterproofing is a fabric's ability to prevent rain water from passing through. A fabric's waterproofing is determined by measuring its resistance to the pressure exerted by a water column, measured in mm (test based on ISO 811 standard). The higher the pressure, the more waterproof the fabric. The fabric used is waterproof to 10 000 mm, meaning that it resists the pressure of a 10 000 mm water column (which is about the same as a heavy thunderstorm).
BREATHABLE FABRIC
To determine whether a fabric is breathable, we measure its evaporative resistance (test based on standard ISO 11092). The fabric we have used has a breathability rating (RET) of 6 on a scale out of 40
https://tinyurl.com/y7vnkwtq
The lower the rating, the more the fabric lets through the water vapour generated by your body during exerciseWhat the scores mean:RET ≤ 3 = extremely breathable fabric
RET ≤ 6 = very breathable fabric
RET ≤ 12 = breathable fabric
RET ≤ 20 = not very breathable fabric
https://tinyurl.com/y7vnkwtq
The lower the rating, the more the fabric lets through the water vapour generated by your body during exerciseWhat the scores mean:RET ≤ 3 = extremely breathable fabric
RET ≤ 6 = very breathable fabric
RET ≤ 12 = breathable fabric
RET ≤ 20 = not very breathable fabric
WHAT IS A TRIPLE-LAYER JACKET?
This all-mountain jacket is made with a triple-layer membrane.
What does that mean?
- 3 layers: the membrane is glued between the outer and inner fabric. Used for robust, effective jackets.
- 2.5 layers: the membrane is glued under the outer fabric and protected by a thin film on the inside. Used for lightweight jackets.
- 2 layers: the membrane is only glued to the outer fabric.
What does that mean?
- 3 layers: the membrane is glued between the outer and inner fabric. Used for robust, effective jackets.
- 2.5 layers: the membrane is glued under the outer fabric and protected by a thin film on the inside. Used for lightweight jackets.
- 2 layers: the membrane is only glued to the outer fabric.
POCKETS
There is a waterproof zip-up pocket on the chest that you can easily access when wearing a backpack or bum bag. The pocket has a specific space for your keys and your phone so they won't rattle around during your ride.
The two-way main zip means you can open it from the bottom for better ventilation on climbs. The zip pulls are easy to use, even when wearing gloves.
The two-way main zip means you can open it from the bottom for better ventilation on climbs. The zip pulls are easy to use, even when wearing gloves.
SIZE AND CUT
This product is fitted to take full advantage of its stretchy fabric.
The raglan sleeves come right up to the neckline (when in a cycling position). This makes them stretchy, leaving you free to move around. Wear a thin, lightweight base layer under this jacket, as well as a lightweight mid layer.
The raglan sleeves come right up to the neckline (when in a cycling position). This makes them stretchy, leaving you free to move around. Wear a thin, lightweight base layer under this jacket, as well as a lightweight mid layer.
A HOOD FOR MOUNTAIN BIKING
The hood is sized to fit a helmet, which is essential when mountain biking.
You can adjust the height and depth as needed.
A semi-rigid visor protects your forehead and eyes. The collar comes up high to offer good protection for your chin and mouth.
The little detail that makes all the difference: the side of the hood is slightly curved for better peripheral vision.
You can adjust the height and depth as needed.
A semi-rigid visor protects your forehead and eyes. The collar comes up high to offer good protection for your chin and mouth.
The little detail that makes all the difference: the side of the hood is slightly curved for better peripheral vision.
A HOLE FOR YOUR WATER BLADDER TUBE
There is an elastic loop on the chest for feeding your water bladder's tube through.
CARE INSTRUCTIONS
You can find detailed info on looking after your mountain bike clothing on our website
Product tests
Our team of product designers based at the B'Twin Village in Lille is continuously working to make cycling more comfortable for our users.
Our obsession is to create products that meet the specific cycling needs of our users and eliminate hindrances to a good cycling experience.
Our obsession is to create products that meet the specific cycling needs of our users and eliminate hindrances to a good cycling experience.
composition
composition
Main fabric: 33.0% Polyamide, 67.0% Polyester; Membrane: 100.0% Polyurethane; Yoke: 100.0% Polyester; Cuff: 20.0% Elastane, 80.0% Polyamide; Pocket: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
ANY TYPE OF IRONING ALLOWED.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Store in a dry place.
TESTS AND WARRANTY
Test product
Our team of product designers based at the B'Twin Village in Lille (France) is continuously working to improve our mountain biking equipment to make riding more comfortable. Your experience allows us to keep on getting better.
This jacket has been tested and validated in the field, in several countries and different regions, and at the Transvésubienne.
Warranty
2 Years
Agree by
All our mountain biking equipment is tested in the field by representative mountain bikers in the Vosges and in the Alps, tests that are complemented by laboratory tests.This dual testing method is an exhaustive, demanding way of creating and constantly improving the technical features and design of our Rockrider products. We also take your feedback into account to constantly update our products.