Diving bag with wheels 120 L black grey
Designed by our advanced teams for the diver seeking to transport all of their equipment safely when travelling over a week or more!
The ideal bag to set off on a trip for one week or more with all your scuba-diving equipment, or to carry your mate’s gear.
BENEFITS
Capacity
120L. One compartment for gear and a second for your personal belongings
Lightweight
4.2 kg
Resistance to salt water
Injection-moulded plastic zip and metal slider that does not jam due to salt.
Robustness
An ultra-impact resistant shell to protect your equipment
TECHNICAL INFORMATIONS
A heat-formed shell to protect fragile equipment
A heat-formed rigid shell to protect the most fragile diving gear. Lightweight design for a 120Â L semi-rigid bag: 4.2 kg. Ideally, put the most fragile items, such as the regulator, the diving computer and the buoyancy compensator in the bottom of the bag, then put the diving suit on top of them. The side and front pockets are insulated with a watertight component. Ideal for storing your papers and diving log book.
A inside waterproof compartment
The main pouch and the pouch under the flap are made of waterproof material to make it easier to organise your diving gear. Even after the wet diving gear has been put back in the bag, the spare clothes in the pouch under the flap are still dry! Perfect for diving trips or days out. The large compartment also helps prevent water dripping out, for example into the car.
Compact dimensions and protection of the contents
The bag contains a hard flap that must be pressed against the bottom before filling up the bag. Then, the U-shaped meal part must be inserted in the rip-tab provided. This detachable flap makes the bottom of the bag rigid to protect your belongings when travelling. It also saves space when the bag is empty, so that the bag can be stored more easily, under a bed for example.
Dimensions and weight of the bag
Length: 85 cm.
Width: 43 cm.
Height: 37 cm.
Weight: 4.2 kg.
Injection-moulded plastic zip
This bag’s zips are made of injection-moulded plastic and the slider of the upper pouch is made of metal. This means that the zips can better withstand salt and are not corroded, unlike metal zip fasteners. And sand does not obstruct the slider, which means that the fastener is less likely to break. This zip fastener is more resistant to its environment.
How is the volume of SUBEA bags measured?
Volume is measured using a standardised method: we fill the main compartment and each pouch will small balls. We then pour the balls into a graduated container, which shows us the equivalent volume in litres.
composition
composition
Main fabric: 100.0% Polyester; Coating: 60.0% Polypropylene, 30.0% Ethylene Vinyl Acetate, 10.0% Calcium Carbonate; Lining: 100.0% Polyester; Webbing: 100.0% Polypropylene
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Test product
Designed and tested by our teams and our technical partner in Hendaye (France).
Agree by
Our technical partner: Ocean (the PADI 5-star diving centre) based on the Water Sports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA diving products: from the design phase with the SUBEA team (product manager, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Parts guarantee
Availability of spare parts essential to the use of the product: 2 years.