Men's Scuba Diving 5 mm Neoprene Wetsuit SCD 500

Name: Men's scuba diving 5 mm neoprene wetsuit SCD 900 black khaki
Availability: InStock

A diving suit for men for temperate waters (16°C-24°C). Adapt to all seasons by modulating this supple, comfortable 5 mm neoprene wetsuit.

ID 8501834

Sold and shipped by

How to get it

thermal insulation
5 mm full neoprene diving suit. Waterproof seams (GBS), smooth sleeve cuffs.
easy dressing
One-piece diving suit with back zip, stretch under arms.
freedom of movement
Stretch neoprene and no stitching under the arms
robustness
Printed reinforcements to reduce wear on the knees, lower back and shoulders.

Description

Design details

Details of thermal insulation
Neoprene 5 mm one-piece wet-type with back zip. Seams taped using a GBS (glued and blind-stitched) assembly. Once a thin layer of water (that enters through the zip) gets trapped between your body and the diving suit, the water stays warm as it is not replaced. This thin layer of water keeps you warm. Rolled, smooth edged cuffs, ankles and neck for maximum watertightness.
Construction of the zip and assembly of the diving suit
The back zip is designed so that two panels of smooth neoprene overlap to limit the inflow of water. The diving suit's GBS assembly (Glued and Blind-Stitched) means that the seams are waterproof: the neoprene is glued and then stitched for extra durability (the needle does not go all the way through the neoprene to stop water getting through). Snap hook on the upper thigh to attach accessories.
Freedom of movement / Easy to put on
One-piece with separate hood (not included). Stretch neoprene under the arms and extremity panels (very soft and stretchy neoprene) to adapt to fit different body shapes and suit various physiques. The extremities of the legs and arms are also made of stretch neoprene for easier dressing. No underarm seams for easier arm movements.
Reduced wear
The diving suit has printed reinforcements on the knees. There are also prints on the friction zones linked to the buoyancy compensator (shoulders and lower back). Also provides better body support and prevents the vest from slipping on the slides. Wrist protection to prevent the dive computer from turning.
Thermal performance class
This scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseilles, France) in order to validate its compliance with the current standard (EN 14225-1:2017). CLASS C certified diving suit: A (+7°C/+12°C / +45°F/+54°F) B (+10°C/+18°C / +50°F/+64°F) C (+16°C/+24°C / +61°F/+75°F) D (+22°C/+30°C / +72°F/+86°F).
Adjust the thickness, adjust your warmth!
When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. This concept was created to keep you from having to purchase different diving suits for different diving conditions, with 5 pieces that can be combined with your suit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.
What is a diving suit?
This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these diving suits are available in thicknesses of 0.5 mm to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving suits.
Tips on how to get into a diving suit
Put your foot in a plastic bag, then slip your leg into your diving suit. Your entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene diving suit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
Tips on how to take care of your diving suit
1) Soak the inside and the outside of the diving suit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well-ventilated place. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease.

Men's Scuba Diving 5 mm Neoprene Wetsuit SCD 500

How to get it

Features

thermal insulation

easy dressing

freedom of movement

robustness

Description

Design details

Specifications

Details

Composition

EU product safety contact

Usage & care

Environmental impact

Ecodesign approach

Description

Design details

Specifications

Details

Composition

EU product safety contact

Specifications

Details

Composition

EU product safety contact

Usage & care

How to use

Everything you need to know

How to repair or replace

2-year warranty

Care instructions

Usage precautions

Storage

Cleaning

Environmental impact

Ecodesign approach

Specifications

Details

Composition

EU product safety contact

How to use

Everything you need to know

How to repair or replace

2-year warranty

Care instructions

Usage precautions

Storage

Cleaning