Go to search
Go to content
Go to footer

DIN MC 11 Zen pro diving regulator + octopus system pack

This DIN regulator kit guarantees fluid, natural breathing.

ID 9003309

Sold and shipped by

How to get it

easy breathing
over-balanced 1st stage, diaphragm Dive-Predive settings Certified water >4°C
mouth comfort
Very light second stage in the mouth (149 grams)
easy assembly / dismantling
Regulator with DIN 300b scuba tank attachment system.

Description

Design details

Pack contents
This kit consists of a Cressi Zen MC11 DIN 300 bar regulator and a Zen octopus system with a 1 m yellow hose. (direct system hose and pressure gauge not supplied)
Functionalities of the 1st stage:
Performance: Balanced diaphragm and Pressure Sync technology for optimal breathing comfort and a stable average pressure. Ergonomic design: T-shaped layout (2 HP ports, 4 MP ports) to facilitate hose routing; compact, lightweight design (422 g). Resistance: Scratch-resistant nickel coating Use: Ideal for recreational diving, certified for temperate waters ( >10°C°)
Functionalities of the 2nd stage:
Flow control: Adjustable Venturi flap (dive/pre-dive mode) to maximise flow and avoid continuous flow on the surface. Ergonomic design: Oversized drain button, easy to locate and operate, even when wearing gloves. Lightweight: Lightweight design, weighing just 149 g (without the hose)
Functionalities of the octopus system
Reliability: Robust downstream valve system with built-in safety device. The radial openings prevent continuous flow against the current. Control: Adjustable Venturi and oversized purge button for easy use in emergencies. Maintenance: Simplified design for dismantling without special tools. Use: EN 250A certified for temperate and cold water ( >4°C)
Maintenance after each dive
Make sure you put the dust cap on properly. Soak the regulator in a tray of fresh water. DANGER: If you use a hosepipe, do not use a pressure jet to clean the 2nd stage. The pressure of the jet could damage the membrane and/or the internal valve. Wipe the regulator dry. Do not expose your regulator to full sunlight for a lengthy period.
Storage and maintenance:
Store your regulator in a clean environment away from light and at a moderate temperature. Do not store it near a source of heat or in a room that may contain chemical vapours like chlorine, ozone, etc. (e.g. a swimming pool machine room). Never store the regulator on top of a cylinder/tank DANGER: Never use solvents or hydrocarbon-based products to clean or lubricate your regulator. Never use spray cans.
Servicing and inspections
Cressi advises you to service your regulator every two years and to make a visual inspection at least once a year. These two inspections must be made in a Cressi certified workshop. A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity. Please visit our website.