Filters 0
Filters 0
QUECHUA Ref. 8331658 634401

1.5 L stainless steel insulated flask with cup for hiking

Tax included
Colour: GREY
  • GREY
Not available

Store Availability

Need to keep your drinks hot or cold for several hours? Our designers have developed this (large) highly insulated bottle.


Easy transport

Retractable handle for transport and ease of pouring.

Easy maintenance

Easy to clean thanks to its dismantlable mouthpieceStainless steel internal wall

Ease of use

Double opening: Wide or quick to pour. Handle, cup included. S/steel


Double stainless steel int. wall con.18/8 (304) with an air gap between the two.


Starting temperature 95°C: 83°C after 6hr, 74° after 12hr, 60° after 24hr.


Advice to maximise the performance of your isothermal bottle.

"Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close bottle.

The fuller the bottle the better it keeps its contents cold or warm."


Lid with a large opening but also with a fast ipening system allowing you to pour quickly without losing heat.

Care tips

Wash by hand, not in the dishwasher. Rinse in clean water, then leave to dry with the cap open.

First use

Rinse the entire product 3 times with clear water before using for the first time.

Materials and regulations

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.

Weight and dimensions

Volume: 1.5 litre

Dimensions : Ø 12,5 cm x 29 cm

Weight : 980 grams

Available in: 0.4L / 0.7L / 1L / 1.5L



Bottle body: 7.0% Polypropylene, 3.0% Acrylonitrile Butadiene Styrene, 90.0% Stainless Steel; Plug: 78.0% Polypropylene, 2.0% Acrylonitrile Butadiene Styrene, 20.0% Stainless Steel; Gasket: 100.0% Silicone

Tips for storage and maintenance

Storage tips

Wash and dry before storing away. Store in a clean, dry place.

Restrictions on use

No alcohol. Do not put in a microwave oven or freezer.


Test product

Our isothermal products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.


2 Years