Breathability test

Component breathability is measured by its thermal evaporative resistance (RET).

This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.

The lower the RET, the more breathable the fabric.



RET ≤ 6: very breathable fabric

RET ≤ 12: breathable fabric

RET ≤ 20: little breathability



Our product has a 12 RET rating

CONSTRUCTION OF THE JACKET

This jacket is constructed with 2 coated layers, including a mesh lining (large mesh lining)

‘2 layers’ means there is the outer fabric and the lining.

A coating is applied to the inside of the fabric, it is similar to a resin that makes the component waterproof, while remaining breathable. The inner lining of the jacket has the role of protecting this coating

Cut

This jacket has a cut that fits all shapes while still looking very feminine. A warm layer, such as a fleece or light jumper, can be worn underneath. Inner lining can also provide more comfort.

You can choose your usual size, or a size above if you don't want it to be worn fitted.

How do I restore my jacket's water-repellent properties?

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.

Product design: our expertise

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute-Savoie.

This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts.

A great asset for designing your mountain walking products and providing you with all our expertise.

Removable hood

The hood can be removed thanks to the press studs. Its height can be adjusted using an elasticated cord, and its depth adjusted using a Velcro tab located at the back of the hood.

Waterproofness test

Waterproofing is measured by a fabric’s resistance to water pressure expressed in mm of water column (JIS 1092 standard).

The higher the water pressure, the more waterproof the fabric.

The component of this product has a waterproof rating of 5000 mm, i.e. it can withstand the pressure exerted by a 5000 mm column of water.

This is also equivalent to 5 000 Schmerbers.