0-20PSI 13.8 V 10A electric pump (12V socket) for SUP boards and kayaks

CONNECTION

Works when plugged into your vehicle's 12 V cigarette lighter socket with the engine running (13.8 Volt)

Compatible with at least 10-amp fuses.

Pressure of up to 20 PSI (1.37 bar) provided.

INFLATING

1/ Connect the pump to the cigar lighter with the car engine running.

2/ Connect the hose from the pump to the boat

3/ Select the pressure unit: psi/bar

4/ Set the recommended pressure with the +/- buttons

5/ Start inflating by pressing the POWER logo

The pump stops automatically at the set pressure.



Adjustment of the target pressure from 0.1 PSI (0.01 Bar) to 20 PSI (1.37 BAR).

One inflation cycle to 0.4 PSI and then one pressure cycle to 20 PSI.

DEFLATING

1/ Connect the pump to the cigarette lighter.

2/ Connect your hose to the "DEFLATE” outlet on the pump and connect it to the valve on your boat.

3/ Select the pressure unit: psi/bar

4/ Press the (-) button until “DEFLATE" appears on the screen.

5/ Start deflating by pressing the "POWER" logo.

6/ To stop deflating, press "POWER" or wait for the end of the 120-second cycle.

DIMENSIONS

Length: 28.5 cm

Width: 19 cm

Height: 9 cm

Weight: 1.6 kg

Supplied with a set of adapters

In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with:

A "Mini Boston" adapter to inflate the kayak seats

a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents.

A nozzle adapter to inflate certain kitesurfing wings.